We Also Recommend
Original Stäubli quick disconnect coupling (lock), EPDM seals, aluminum, coupling, 3/8"-24UNF male thread
Note: Our standard color is RED (yellow as special order, delivery time between 2-4 weeks)
The clutch was developed for tough racing applications.
Stäubli quick release clutches are well known and need no further explanation.
Except perhaps the note that the clutches can be sent to Stäubli at any time for overhaul/maintenance.
The coupling enables hydraulic lines to be disconnected quickly and cleanly without fluid escaping or air entering the system. They are suitable for brake fluids DOT3&4, such as Racing.
Scope of delivery: 1 x coupling half with EPDM seals SPH03.7652-BA-L-KR-JE
Material: Aluminium, red anodized
Genuine Stäubli quick-disconnect coupling, EPDM seals, aluminum, coupling, 3/8"-24UNF male thread
Note: Our standard color is RED (yellow available as a special order; delivery time 2–4 weeks)
The coupling was developed for heavy-duty use in motorsports.
Stäubli quick-disconnect couplings are well known and require no further explanation.
Except perhaps to note that the couplings can be sent to Stäubli at any time for overhaul or maintenance.
The coupling allows for quick and clean disconnection of hydraulic lines without fluid leakage or air entering the system. They are suitable for DOT 3 & 4 brake fluids, as well as racing fluids.
Package contents: 1 x coupling half with EPDM seals SPH03.1652-BA-L-KR-JE
Material: Aluminum, red anodized
Product SPH03.1652/BA/L/KR/JE
Max. operating pressure 200.00 bar
Permissible operating temperature: -20.00 °C to 150.00 °C
Max. tightening torque +/- 10% 10.00 N·m
Genuine Stäubli quick-disconnect coupling, EPDM seals, TITAN, coupling, 3/8"-24UNF male thread
Note: We do not typically keep this model in stock. Delivery time: 2–4 weeks
The coupling was developed for heavy-duty use in motorsports.
Stäubli quick-disconnect couplings are well known and require no further explanation.
Except perhaps to note that the couplings can be sent to Stäubli at any time for overhaul or maintenance.
The coupling allows for quick and clean disconnection of hydraulic lines without fluid leakage or air entering the system. They are suitable for DOT 3 & 4 brake fluids, as well as racing fluids.
Package contents: 1 x coupling half with EPDM seals SPH03.1652-BA-TI-Kx-JE
Material: TITAN, blue or green anodized
Product SPH03.1652/BA/TI/KB/JE
Max. operating pressure 350.00 bar
Permissible operating temperature: -20.00 °C to 150.00 °C
Max. tightening torque +/- 10% 15.00 N·m
Genuine Stäubli quick-disconnect coupling, EPDM seals, aluminum, 10 mm banjo, 20° angled
Note: Our standard color is RED (yellow available as a special order, delivery time 2–4 weeks)
The coupling was developed for heavy-duty use in motorsports.
Stäubli quick-disconnect couplings are well known and need no further explanation.
Except perhaps to note that the couplings can be sent to Stäubli at any time for overhaul or maintenance.
The coupling allows for quick and clean disconnection of hydraulic lines without fluid leakage or air entering the system. They are suitable for DOT 3 & 4 brake fluids, as well as racing fluids.
Package contents: 1 x coupling half with EPDM seals SPH02.1021.BA-L-KR-BJ-JE
Material: Aluminum, red anodized
Original Stäubli quick disconnect coupling, EPDM seals, aluminum, coupling, M10x1.00 male thread, with Oring, flat sealing
Note: Our standard color is RED (yellow as special order, delivery time between 2-4 weeks)
The clutch was developed for tough racing applications.
Stäubli quick release clutches are well known and need no further explanation.
Except perhaps the note that the clutches can be sent to Stäubli at any time for overhaul/maintenance.
The coupling enables hydraulic lines to be disconnected quickly and cleanly without fluid escaping or air entering the system. They are suitable for brake fluids DOT3&4, such as Racing.
Scope of delivery: 1 x coupling half with EPDM seals SPH03.1410-BA-L-KR-JE
Material: Aluminium, red anodized
Original Stäubli quick disconnect coupling, EPDM seals, TITAN coupling, M10x1.00 male thread, with Oring, flat sealing
Note: Available as a special order, delivery time between 2-4 weeks
Colors: BLUE and green
The clutch was developed for tough racing applications.
Stäubli quick release clutches are well known and need no further explanation.
Except perhaps to say that the clutches can be sent to Stäubli for overhaul/maintenance at any time.
The coupling enables hydraulic lines to be disconnected quickly and cleanly without fluid escaping or air entering the system. They are suitable for brake fluids DOT3&4, such as Racing.
Scope of delivery: 1 x coupling half with EPDM seals SPH03.1410-BA-L-KR-JE
Material: TITAN, blue or green
Original Stäubli quick disconnect coupling, EPDM seals, aluminum, coupling, M10x1.00 male thread, with Oring, flat sealing
The clutch was developed for tough racing applications.
Stäubli quick disconnect clutches are well known and need no further explanation.
Except perhaps to point out that the clutches can be sent to Stäubli for overhaul/maintenance at any time.
The coupling enables hydraulic lines to be disconnected quickly and cleanly without fluid escaping or air entering the system. They are suitable for brake fluids DOT3&4, such as Racing.
Scope of delivery: 1 x coupling half with EPDM seals SPH03.7410-BA-L-KR-JE
Material: Aluminium, red anodized
Genuine Stäubli Quick-Disconnect Coupling, Type: CBR.02, EPDM Seals, TITAN, Socket, 3/8"-24UNF Male Thread (DASH#03)
Note: Please note the delivery time!
The CBR.02 coupling was developed for heavy-duty use in motorsports.
Smaller design than Type SPH.03, locking mechanism with 3 pins
Stäubli quick-disconnect couplings are well known and require no further explanation.
Except perhaps to note that the couplings can be sent to Stäubli at any time for overhaul or maintenance.
Because they’re made of TITANIUM, the temperature of the braking system doesn’t affect the rubber seals as much as it does with aluminum couplings. That’s why couplings from the CBR series are so commonly used in professional racing. Added to this are the more compact design, triple locking mechanism, and lower weight compared to the SPH series. However, this comes at a price!
The coupling allows for quick and clean disconnection of hydraulic lines without fluid leakage or air entering the system. They are compatible with DOT 3 & 4 brake fluids, as well as racing fluids.
Package contents: 1 x coupling half with EPDM seals CBR02.1652.TI.xx.JE
Material: Titanium, green or blue anodized
Product CBR02.1652/TI/JE/xx
Max. operating pressure 300.00 bar
Permissible operating temperature: 5.00 °C to 150.00 °C
Max. tightening torque +/- 10% 9.00 N·m
Genuine Stäubli Quick-Disconnect Coupling (CLOSING NIPPLE) Type: CBR.02, EPDM seals, TITAN, plug, 3/8"x24UNF male thread (DASH#03)
Note: Please note the delivery time!
The Type CBR.02 locking nipple was developed for heavy-duty use in motorsports.
Smaller design than Type SPH.03, locking mechanism with 3 pins
Stäubli quick-disconnect couplings are well known and require no further explanation.
Except perhaps to note that the couplings can be sent to Stäubli at any time for overhaul or maintenance.
The coupling allows for quick and clean disconnection of hydraulic lines without fluid leakage or air entering the system. They are suitable for DOT 3 & 4 brake fluids, as well as racing fluids.
Because they’re made of titanium, the temperature of the braking system doesn’t affect the sealing “rubber” as much as it does with aluminum couplers. That’s why CBR series couplers are so commonly used in professional racing. Added to this are the smaller design, triple locking mechanism, and lower weight compared to the SPH series. However, this comes at a price!
Package contents: 1 x clutch half (locking nipple) with EPDM seals CBR02.7652.TI.xx.JE
Material: Titanium, green or blue anodized
Product CBR02.7652/TI/JE/xx
Max. operating pressure 300.00 bar
Permissible operating temperature: 5.00 °C to 150.00 °C
Max. tightening torque +/- 10% 9.00 N·m
Original Stäubli quick-disconnect coupling (NIPPLUG)Type: CBR.02, EPDM seals, STAINLESS STEEL, plug, M10x1.00 male thread
Note: Please note delivery time!
The locking nipple TYPE CBR.02 was developed for tough racing applications.
Smaller design than type SPH.03, locking with 3 pins
Stäubli quick disconnect couplings are well known and need no further explanation.
Except perhaps to point out that the clutches can be sent to Stäubli for overhaul/maintenance at any time.
The coupling enables hydraulic lines to be disconnected quickly and cleanly without fluid leaking or air entering the system. They are suitable for brake fluids DOT3&4, such as Racing.
Due to the TITANIUM material, the temperature of the brake system does not affect the sealing "rubbers" as much as with aluminum clutches. The CBR series clutches are therefore often used in professional racing. Added to this is the smaller design, triple locking and lower weight than the SPH series. However, this also comes at a price!
Scope of delivery: 1 x coupling half (locking nipple) with EPDM seals CBR02.7410.TI.xx.JE
Material: Titanium, green or blue anodized
