HEL BRAKE CALIPERS

HEL-Performance® 4-Piston Radial Brake Caliper (1 Pair) (Price Reduced!)

HEL Performance brake calipers are available with a MotoGP-inspired nickel coating. Each caliper is equipped with two pad retaining pins. To replace the brake pads, simply unscrew these pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, since forging is not capable of producing these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material usage. Radial mounting of two-piece brake pads with two pads per caliper.

• 4-piston (32 mm) stainless steel brake caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts available in 100 mm, 108 mm, and NOW also in 130 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• Complete with spacers and necessary screws

The calipers are designed to accommodate stock brake pads for popular supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various race tracks in Spain and England, as well as in street use, these pads have delivered outstanding performance and results. The EP pad compound has ABE approval; the GPX pad compound is a pure racing compound without ABE approval. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100 mm hole spacing = 30 mm offset
• Brake caliper with 108 mm bolt pattern = 22.5 mm offset

Package Contents:

• 2 x CNC-machined brake calipers (R+L)
• 4 mounting screws
• 4 spacer rings
• 2 x stainless steel hollow screws with copper O-rings

For more information, please visit the following link

Note: HEL Performance brake pumps and calipers are not compatible with Castrol SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel sheath
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or parts certificates, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

HEL-Performance® 4-Piston Radial Brake Caliper (1 Pair) (INTRODUCTORY PRICE)

HEL Performance brake calipers are available with a MotoGP-inspired nickel finish. Each caliper is equipped with two pad retaining pins. To replace the brake pads, simply unscrew these pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons rather than heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as forging is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 4-piston (32 mm) stainless steel caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts available in 100 mm, 108 mm, and NOW also in 130 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• Complete with spacers and necessary screws

The calipers are designed to accommodate stock brake pads for popular supersport motorcycles. This gives you a wide selection of brake pads from nearly every manufacturer and supplier. We currently offer EBC Type FA390 brake pads as an option. In our extensive testing with renowned top riders on various racetracks in Spain and England, as well as in street use, these pads have delivered outstanding performance and results. The EP pad compound has ABE certification; the GPX pad compound is a pure racing compound without ABE certification. Comparable brake pad types are: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100 mm bolt pattern = 30 mm offset
• Brake caliper with 108 mm bolt circle diameter = 22.5 mm offset

Package contents:

• 2 x CNC-machined brake calipers (R+L)
• 4 x mounting screws
• 4 x spacer rings, 6 mm thick
• 2 x stainless steel hollow screws with copper O-rings

For more information, please visit the following link

Note: HEL Performance brake pumps and calipers are not compatible with Castrol SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

Steel-braided brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feel in the brake lever
• Direct and precise bite
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if needed)

HEL-Performance® 4-Piston Radial Brake Calipers (1 Pair), Smooth Back Side (INTRODUCTORY PRICE)

HEL Performance brake calipers feature a MotoGP-inspired nickel finish. Each caliper is equipped with two pad retaining pins. To replace the brake pads, simply unscrew these pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, since forging is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 4-piston (32 mm) stainless steel caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts available in 100 mm, 108 mm, and NOW also in 130 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• with spacers

The calipers are designed to accommodate stock brake pads for popular supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various racetracks in Spain and England, as well as in street use, these pads have delivered outstanding performance and results. The EP pad compound has ABE approval; the GPX pad compound is a pure racing compound without ABE approval. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100 mm hole spacing = 30 mm offset
• Brake caliper with 108 mm bolt pattern = 22.5 mm offset
• Brake caliper with 130 mm bolt pattern = 22.5 mm offset

Package Contents:

• 2 x CNC-machined brake calipers (R+L), rear side with cooling fins
• 4 x spacer rings
• 2 x stainless steel hollow screws with copper O-rings
• Mounting screws not included; please order them separately if needed

For more information, please see the following link

Note: HEL Performance brake master cylinders and calipers are not compatible with Castrol SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not listed—or not yet listed—please contact us directly.

(** is included, if required)

HEL-Performance® 4-Piston Radial Brake Caliper (1 Pair), Rear Side with Cooling Fins (INTRODUCTORY PRICE)

HEL Performance brake calipers are available with a MotoGP-inspired nickel coating. Each caliper is equipped with 2 pad retaining pins. To replace the brake pads, simply unscrew these pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons rather than heating the fluid improves braking performance over the long term—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as forging is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part featuring CNC-machined precision. We maximize weight savings and minimize material usage. Radial mounting of a two-piece brake pad assembly with two brake pads per caliper.

• 4-piston (32 mm) stainless steel brake caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts available in 100 mm, 108 mm, and NOW also in 130 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• with spacer

The calipers are designed to accommodate stock brake pads for popular supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various racetracks in Spain and England, as well as in road use, these pads have delivered outstanding performance and results. The EP pad compound has ABE approval; the GPX pad compound is a pure racing compound without ABE approval. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100mm bolt pattern = 30mm offset
• Brake caliper with 108 mm bolt pattern = 22.5 mm offset

Package Contents:

• 2 x CNC-machined brake calipers (R+L), rear side with cooling fins
• 4 x spacer rings
• 2 x stainless steel hollow screws with copper sealing rings
• Mounting screws not included; please order them separately if needed

For more information, please visit the following link

Note: HEL Performance brake master cylinders and calipers are not compatible with Castrol SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 4-Piston Radial Brake Caliper (1 Pair), Smooth Back (INTRODUCTORY PRICE)

HEL Performance brake calipers are available with a MotoGP-inspired nickel coating. Each caliper is equipped with two pad retaining pins. To replace the brake pads, simply unscrew these pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons rather than heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part manufactured to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 4-piston (32 mm) stainless steel caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts available in 100 mm, 108 mm, and NOW also in 130 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• with spacers

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various race tracks in Spain and England, as well as in street use, these pads have delivered outstanding performance and results. The EP pad compound has ABE certification; the GPX pad compound is a pure racing compound without ABE certification. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100 mm bolt pattern = 30 mm offset
• Brake caliper with 108 mm bolt pattern = 22.5 mm offset
• Brake caliper with 130 mm bolt circle diameter = 22.5 mm offset

Package Contents:

• 2 x CNC-machined brake calipers (R+L), rear side with cooling fins
• 16 x spacer rings (4 each in 5, 7, 12, and 14 mm)
• 2 x stainless steel hollow screws with copper sealing rings
• Mounting screws not included; please order them separately if needed

For more information, please visit the following link

Note: HEL Performance brake master cylinders and calipers are not compatible with Castrol SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not listed—or not yet listed—please contact us directly.

(** is included, if required)

HEL-Performance® 4-Piston Radial Brake Calipers (1 Pair), Rear Side with Cooling Fins (INTRODUCTORY PRICE)

HEL Performance brake calipers are available with a MotoGP-inspired nickel coating. Each caliper is equipped with two pad retaining pins. To replace the brake pads, simply unscrew these pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete circle through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the type of fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process cannot produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 4-piston (32 mm) stainless steel brake caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts available in 100 mm, 108 mm, and NEW 130 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• with spacers

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from almost all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various race tracks in Spain and England, as well as in road use, these pads have delivered outstanding performance and results. The EP pad compound has ABE approval; the GPX pad compound is a pure racing compound without ABE approval. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100 mm bore spacing = 30 mm offset
• Brake caliper with 108 mm bolt pattern = 22.5 mm offset

Package Contents:

• 2 x CNC-machined brake calipers (R+L), rear side with cooling fins
• 16 x spacer rings (4 each in 5, 7, 12, and 14 mm)
• 2 x stainless steel hollow screws with copper O-rings
• Mounting screws not included; please order them separately if needed

For more information, please visit the following link

Note: Brake master cylinders and brake calipers from HEL Performance are not compatible with Castrol SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 4-Piston Radial Brake Caliper (1 piece)

HEL Performance brake calipers are available with a MotoGP-inspired nickel coating. Each caliper is equipped with 2 pad retaining pins. To replace the brake pads, simply unscrew these pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to remove all air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons rather than heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as forging is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of a two-piece brake pad assembly with two brake pads per caliper.

• 4-piston (32 mm) stainless steel caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts in 100 mm and 108 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• Complete with spacers and necessary screws

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various race tracks in Spain and England, as well as in street use, these pads have delivered outstanding performance and results. The EP pad compound has ABE approval; the GPX pad compound is a pure racing compound without ABE approval. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100 mm hole spacing = 30 mm offset
• Brake caliper with 108mm hole spacing = 22.5mm offset

Package Contents:

• 1 x CNC-machined brake caliper (R or L)
• 2 mounting screws
• 8 spacer rings (2 each in 5, 7, 12, and 14 mm)
• 1 x stainless steel hollow screw with copper sealing ring

For more information, please visit the following link

Note: HEL Performance brake master cylinders and brake calipers are not compatible with Castrol SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feel in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

(** is included, if required)

HEL-Performance® 4-Piston Radial Brake Caliper (1 Pair) (INTRODUCTORY PRICE)

HEL Performance brake calipers are available with a MotoGP-inspired nickel coating. Each caliper is equipped with 2 pad retaining pins. To replace the brake pads, simply unscrew the pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the type of fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 4-piston (32 mm) stainless steel brake caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts available in 100 mm, 108 mm, and NOW also in 130 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• with spacers

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various race tracks in Spain and England, as well as in street use, these pads have delivered outstanding performance and results. The EP pad compound has ABE certification; the GPX pad compound is a pure racing compound without ABE certification. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100mm bolt pattern = 30mm offset
• Brake caliper with 108 mm bolt pattern = 22.5 mm offset
• Brake caliper with 130mm bolt pattern = 22.5mm offset

Package Contents:

• 2 x CNC-milled brake calipers (R+L)
• 4 spacer rings, 6 mm thick
• 2 x stainless steel hollow screws with copper sealing rings
•  Mounting screws not included; please order them separately if needed.

For more information, please visit the following link

Note: HEL Performance brake master cylinders and calipers are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the brake system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** Included if required)

HEL-Performance® 2-piston CNC brake caliper, axial, 64 mm bore spacing, 2 x 30 mm stainless steel pistons

The rear brake caliper from HEL Performance is equipped with 1 pad retaining pin. To replace the brake pads, simply unscrew this pin briefly and replace the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that a complete loop runs through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh approximately 420 grams (without pads and retaining pin) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons rather than heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as forging is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material usage. Radial mounting of two-piece brake pads with two pads per caliper.

• 2-stainless-steel-piston (30 mm) caliper design.
• The brake caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• 64 mm axial mounts for many modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers.

We currently offer EBC-type brake pads in various compound options as an option.

Package Contents:

• 1 x CNC-machined brake caliper
• 1 x stainless steel hollow screw with copper sealing ring

Compatible accessories, not included: EBC-type brake pads 

For more information, please visit the following link

Note: Brake master cylinders and calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may, under certain circumstances, cause seals to fail.

HEL-Performance® 2-Piston CNC Brake Caliper, Axial, 84 mm, 2 x 32 mm Pistons

The rear brake caliper from HEL Performance is equipped with 1 pad retaining pin. To replace the brake pads, simply unscrew this pin briefly and replace the pads. The calipers should be blown out with air before reinstallation to ensure that the inner surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the brake caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 480 grams (excluding pads and retaining pin) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process is unable to produce these details. We offer the very highest product quality. The finish is stunning, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 2-stainless-steel-piston (32 mm) caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• 84 mm axial mounting for many modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers.

We currently offer EBC FA266 brake pads in various compound options as an option.

Package Contents:

• 1 x CNC-machined brake caliper
• 1 x stainless steel hollow screw with copper sealing ring

Compatible accessories (not included): EBC Type FA266 brake pads

For more information, please visit the following link

Note: Brake master cylinders and brake calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail under certain conditions.