Braided steel brake hose HEL - Suzuki GSXR600 L1-L8 (C3) (2011-2018) - Front wheel - 2-piece, (F) Full Length (w. ABE)

HEL-Performance® copper sealing rings for 10mm ring connections/screws

Nominal dimensions: 10x15x1.5mm
Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

RBF 660 Factory Line, 0.5 liter

Manufacturer's specifications:

Fully synthetic polyglycol-based brake fluid.
For the most common types of racing brake systems (steel, carbon, or ceramic).

Dry boiling point: 328 °C
Wet boiling point: 204 °C

Standards: SAE J 1703, ISO 4925, FMVSS 116 DOT 4

Advantages:

• Miscible with all DOT 3, DOT 4, and DOT 5.1 polyglycol-based brake fluids; however, not recommended
• Extremely high dry boiling point of 328°C compared to other silicone- or polyglycol-based products, ensuring safe braking even under the most extreme operating conditions
• Very high wet boiling point of 205°C compared to other silicone- or polyglycol-based products, allowing for safe braking even in high humidity or during wet races
• Under racing conditions, brakes are subjected to extreme thermal stress; therefore, Motul RBF 660 should be checked at least after every second race and replaced as needed
• Brake fluid absorbs moisture from the ambient air, which lowers its boiling point. For this reason, Motul RBF 660 should only be stored under constant climatic conditions, carefully sealed in its original container

Warning: Do not mix with silicone-based brake fluids (DOT 5) or specialty fluids such as LHM. The fluid may damage the vehicle’s paint.

Contents: 1 bottle of brake fluid, volume: 0.5 liters

Download Technical Data Sheet: TDB-RBF660
Download Safety Data Sheet: SDB-RBF660

HEL-Performance®dust cap for bleeder nipple
Material: Rubber

The important little cap that you often have to look for.

Very practical with a small tab that is placed over the bleeder nipple.
This means the cap can no longer get lost.
With HEL step on the cap :-)

Scope of delivery: 1 x dust cap, rubber

Braided steel brake lines and kits from HEL Performance :)

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® PVC Cable Guide 8-9 mm

A very practical solution for securely and safely attaching stainless steel flex hoses to an original Schaluch grommet. Also very helpful for securing a hose to a surface using plastic cable ties. This prevents damage to or pinching of the hose and its PVC protective jacket.

TIP: The PVC material of the small sleeve is relatively hard. This makes it easy to cut lengthwise and then slip over an existing hose. Because of the harder material, they won’t open on their own and hold very well on the hose. This is especially true when they are inserted into a mount. If necessary, glue them back together with superglue.
Alternatively, there is also a soft and flexible version available: HEL-GROMMET-W in our shop.

Contents: 1 x PVC cable guide
Approx. dimensions: L: 22 mm - O.D.: 13.5/16 mm - I.D.: 8 mm

Steel-braided brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certificates, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

(** is included, if required)

HEL-Performance® P-clamp, 12mm, VA/rubber

With this P-clamp, stainless steel flex cables can be fastened gently and securely.
Damage or crushing of the cable and PVC protective jacket is prevented.

Scope of delivery: 1 x P-clamp, inner diameter 12mm
Material: Stainless steel with rubber protection,

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Lens seal, brass, 8x3.8 mm, 3 mm bore, 2x120° convex sealing cone.

The lens gasket is suitable for connecting certain fittings to one another. It is often used for connecting to metal lines.

Please note that the connector blocks in HEL Performance’s ABS line kits are designed such that this lens gasket is NOT required. With HEL Performance, the sealing cone is already integrated into the connector block. By its very nature, a lens gasket must seal on both sides. However, if the sealing cone is already present in the connector—as is the case with HEL Performance—only one surface needs to be sealed. In our view, this provides greater operational reliability. It is also likely easier to handle during installation.

In some applications, however, a lens gasket is required. That is why we offer it as an accessory.

Package contents: 1 x lens gasket
Material: Brass

You can find steel-braided brake line kits with a selection of models in our dedicated online shop at:
motorrad.helperformance.de(please click on the link)

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel sheath
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

HEL Performance mounting bracket 75mm made of stainless steel. E.g. AG container or similar

Small, practical item made of stainless steel. Laser cut. Universal use.
The holder is very easy to bend and shape by hand, e.g. to optimally position the expansion tank.

Dimensions: approx. 75 x 2mm (measured in the middle of the hole)

Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	with ABE, parts certificate, or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines!
	Connections can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique design of HEL Performance. Put your hand on it !!!!! #EasyMount
	Precisely fitting line kits !
	Easy installation, as each brake line kit comes with the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance pipe is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good driver and an average driver is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

Note: The photos shown are examples and do not show the brake line kit for the specified vehicle! You have the option of specifying your desired hose color when ordering. The lines are then manufactured "fresh" for you according to your wishes and specifications!

Technical data

Further information and instructions can also be found in the "Questions and answers" section

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	with ABE, parts certificate, or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines!
	Connections can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique design of HEL Performance. Put your hand on it !!!!! #EasyMount
	Precisely fitting line kits !
	Easy installation, as each brake line kit comes with the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance pipe is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good driver and an average driver is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

Note: The photos shown are examples and do not show the brake line kit for the specified vehicle! You have the option of specifying your desired hose color when ordering. The lines are then manufactured "fresh" for you according to your wishes and specifications!

Technical data

Further information and instructions can also be found in the "Questions and answers" section

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-

(Incl. stainless steel banjo bolts* (*for connections with ring connection/banjo), incl. copper sealing rings)

#WhatsStoppingYou #RideTheBestYouCan #RideHEL

	Banjo bolts*, sealing rings, holders, guides or distributors are already included in the kit!
	Compare the prices! Ready-to-select brake line kits for your vehicle are always supplied by HEL Performance with the required connections and banjo bolts made of the finest stainless steel, copper sealing rings, rubber guides (e.g. grommets) or brackets. Manifold or connection blocks, e.g. to the metal lines from the ABS, are also included and have already been firmly pressed onto the hose during production. Lens seals, as used by many other suppliers, are completely unnecessary as the blocks themselves have the appropriate sealing cone. HEL Performance does not charge extra for any of this!!!! *Somelines do not require a banjo bolt as they themselves have a connection with an internal or external thread. #LessTinkering #YouGetWhatYouNeed #RideTheBestYouCan #RideHEL
	with ABE, parts certificate or technical certificate for special conversions
	Sometimes it just has to be more than an ABE or a parts certificate. We also offer a purely technical certificate for special applications and conversions. Regardless of the vehicle type or intended use! This gives you maximum flexibility for your project! Note: No ABE is required for clutch lines! #FitAndRide
	Stainless steel connections, at no extra charge, can be twisted at any time
	No matter how far and often! Even back and forth is no problem with the unique HEL Performance design. Hand on it !!!!! Stainless steel connections are our standard, at no extra charge! Nothing else comes on our bike or car! #EasyMount #NoCompromizes
	PVC coating at no extra charge!
	Already included in the price, PVC coating in up to 14 different colors freely selectable. #BetterOptic
	Custom-fit cable kits !
	Easy installation, as the necessary accessories such as the required banjo bolts*, sealing rings and brackets on the hose are included with every brake line kit! No hidden additional costs #EasyMount #YouGetWhatYouNeed
	Precise pressure point, better modulation of the brake system
	Better modulation and a precise pressure point give you completely new control over the entire braking process! #RideTheBestYouCan
	Development and production of all connecting parts at HEL in England!
	HEL Performance has an arsenal of machines on which all connecting parts are manufactured in-house from the finest stainless steel. This enables us to fully control all processes from the first step to the finished brake line. You get the best product from our company. #NoCompromize
	Production of the lines in Germany (Made in Germany)
	Every HEL Performance line is combined in-house with the best stainless steel fittings and then permanently pressed on modern, digitally controlled systems. Every pipe undergoes a final inspection before it is delivered. #SafetyFirst
	Motorsport proven technology
	Our products are used in the highest motorsport classes. Whether MotoGP, Moto-2, Moto-3, EWC (the premier class of material requirements). You always get the same and best HEL quality! #RideTheBestYouCan #RideHEL #TeamHEL

Stainless steel brake lines and kits from HEL Performance optimize the brake system of your motorcycle. Better modulation and a precise pressure point give you completely new control over the entire braking process! No matter whether you ride a MotoGP, Moto-2, Moto3, WSBK, IDM, EWC motorcycle or a simple 50cc scooter. Every vehicle must have the best possible braking system in every situation. Precious steel flex brake lines from HEL Performance are the key to this.

The fine line between victory and defeat

On every kilometer of a race track, it becomes clear how important a well-balanced brake system is. Perfect control gives you the confidence you need because the difference between a good rider and an average rider is that one has speed under control, the other does not. That's why here at HEL Performance we make the best lines and you have the control you need for top performance.

With us you will find the right brake line kit for your vehicle and get what you expect, high quality materials, excellent performance and visually outstanding brake lines.

We only use stainless steel components for all parts of our lines and do not use steel connections like other manufacturers, which rust over the course of their service life and again pose a safety risk.

Choose your desired color and click on Add to cart to order your HEL brake lines.

HEL Performance offers you brake line kits in the so-called "alternative installation method", also with ABE!

We offer different installation variants for many models:

OEM, as original (standard kit): The brake lines correspond in length, number and routing to an original spare part.

Alternative,Full Length: Two lines routed directly from the brake pump, one to the right and one to the left, to the brake callipers.

Alternative, Over the Mudguard: One line is routed directly from the brake pump to the right-hand brake calliper, the second from there via the mudguard to the left-hand brake calliper.

You can also find further information and instructions in the TAB Scope of delivery, as well as in the section: "Questions and answers"
-