Sealing ring + dust ring for brake calipers HEL with 32mm piston diameter

HEL-Performance Stainless Steel Braided Hose!
Custom-made according to your specifications! Please send us your drawing or sketch. Feel free to use our dimension sheets as well.

NEW: You now have the option to upload a drawing or sketch directly. (PDF, JPG, or PNG, max 3 MB) Simply proceed to checkout from your shopping cart and upload a file. This is optional. Otherwise, please feel free to send us the information via email.

Design: Stainless steel-sheathed PTFE hose assembly, custom-made according to your drawing! Comes with a parts certificate!

Whether you need the hose for a vehicle, a machine, or another application, we’ll manufacture the right hose exactly according to your specifications.

For use on motor vehicles, you will receive a DEKRA parts certificate. An installation inspection may be required.

When placing your order, please specify the desired hose color, the connection type, and any necessary brackets, as well as the key numbers for 2.1 and 2.2, or HSN / TSN from the vehicle registration certificate, and—just to be safe—the vehicle data (make, model, type, year of manufacture) as well.

You can twist the connectors on the finished cable yourself for a twist-free installation—anytime!

You have 14 wire colors to choose from at no extra charge:
Transparent, Carbon Look, Black, White, Red-Transparent, Red, Orange, Yellow, Green, Blue-Transparent, Blue, Transparent-Purple, Pink

For many models, we already offer pre-assembled kits in various routing configurations:

OEM, like the original (Standard Kit): The brake lines match an original replacement part in length, number, and routing.

Alternatively, Full Length: Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.

Alternatively, Over the Mudguard: One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the fender to the left brake caliper.

You can also find steel-braided hoses for other models and configurations on our website www.helperformance.de(please click on the link)

HEL Performance Stainless Steel Braided Brake Line

	Banjo fitting / ring eye H692-03C-xx = straight H693-03C-xx = 20° angled H693-03C-xx-RB = 20° downward / 20° right-angled H693-03C-xx-LB = 20° downward / 20° left-bent H694-03C-xx = 45° angled H697-03C-xx = 70° bent H699-03C-xx = 90° bent H695-03C-xx = 20° bent sideways H699-03C-xx-EXT = 90° side bend, long shank Simply replace -xx with the corresponding size: 10, 11, 12, 08, and 06 mm. Example: H692-03C-10 = 10 mm, straight
	external thread, movable screw with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). Can also be supplied angled, bent up to 90°. Simply let us know the required angle. H652-xxC = straight H673-xxC = 45° bent H674-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H652-31C = M10 x 1.00, straight
	internal thread, floating nut with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, only concave; for 1/8", only convex). M10x1.00 and x1.25 can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 13 H650-xxC = straight H653-xxC = 45° bent H654-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP (H650 only) -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H650-31C = M10 x 1.00, straight
	internal thread, sliding nut, with NUT with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). M10x1.00 and x1.25 can also be supplied in angled versions, bent up to 90°. Simply let us know the required angle. SW 17 H663-xxC = straight H663-xxC-45 = bent at 45° H663-xxC-90 = bent at 90° Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H663-31C = M10 x 1.00, straight H663-31C-VAG = straight, double-stepped
	Internal thread, movable nut, stepped, with groove with double sealing cone: convex (outer cone) / concave (inner cone), Can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 17 H675-31C = straight H675-31C-45 = bent at 45° H675-31C-90 = bent at 90°
	Internal thread, movable nut, double-stepped, with NUT with double sealing cone: convex (outer cone) / concave (inner cone), SW 17 H663-31C-VAG = straight, double-stepped
	External thread, fixed with double sealing cone: convex (outer cone) / concave (inner cone), (for 3/8" UNF, concave only), and sealing surface for copper sealing ring! SW17 H657-xxC = straight H658-xxC = straight, extra long H659-03C = 3/8", straight, long H669-31C = M10x1.00, straight, long H669-32C = M10x1.25, straight, long Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H657-31C = M10x1.00, straight
	internal thread, fixed with sealing cone, SW17 H660-31C = straight, concave H660-31C-SQUARE = straight, concave H670-31C = straight, with groove, convex
	Hose Fittings / Mounts      GROMMET, rubber, black       HLL-001, plastic, black HLL-002, plastic, black       HLL-003, plastic, black HLL-004, plastic, black   HLL-005, plastic, black HLL-006, plastic, black       HLL-007, rubber, black

Brake line kits from HEL Performance come with ABE or a parts certificate!

The required hollow screws and copper gaskets are automatically included in the line kit!
_{(Applies only to line kits HBFxxxx, HBRxxxx, HBCxxxx; not to custom-made individual lines)}

HEL Performance also offers brake line kits with an “alternative routing” configuration, complete with ABE approval!

When ordering, please specify the desired line color, the vehicle type, and the vehicle’s type code. (Code number under sections 2.1 and 2.2 in the vehicle registration certificate)

The ABE is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

Note: The photos shown are examples and do not depict the brake line kit for the specified vehicle! When placing your order, you can specify your desired hose color. The lines will then be custom-made “fresh” for you according to your preferences and specifications!

Technical Specifications:

You can also find notes and instructions in the "Questions and Answers" section _{(click the link)}:  

HEL-Performance Stainless Steel Braided Hose!
Custom-made according to your specifications!

NEW: You can now upload a drawing or sketch directly. (PDF, JPG, or PNG, max. 3 MB) Simply proceed to checkout from your shopping cart and upload a file. This is optional. Otherwise, feel free to send us the information via email.

Design: Stainless steel-sheathed PTFE hose, custom-made to your specifications! Comes with a parts certification!

Whether you need the hose for a vehicle, a machine, or any other application, we’ll manufacture the perfect hose exactly to your specifications.

For use on motor vehicles, you will receive a DEKRA parts certificate.
An installation inspection may be required.

When placing your order, please specify the desired hose color, the connection type, and any necessary brackets, as well as the key numbers for 2.1 and 2.2, or HSN / TSN from the vehicle registration certificate, and—to be on the safe side—the vehicle data (make, model, type, year of manufacture) as well.

You can twist the connectors of the finished cable yourself for a twist-free installation—at any time!

	Banjo connector / ring eye H692-03C-xx = straight H693-03C-xx = 20° angled H693-03C-xx-RB = 20° downward / 20° right-angled H693-03C-xx-LB = 20° downward / 20° left-bend H694-03C-xx = 45° bent H697-03C-xx = 70° bent H699-03C-xx = 90° bent H695-03C-xx = 20° bent sideways H699-03C-xx-EXT = 90° bent to the side, long shank Simply replace -xx with the corresponding size: 10, 11, 12, 08, and 06 mm. Example: H692-03C-10 = 10 mm, straight
	external thread, movable screw with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). Can also be supplied angled, bent up to 90°. Simply specify the required angle. H652-xxC = straight H673-xxC = 45° bent H674-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H652-31C = M10 x 1.00, straight
	internal thread, floating nut with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, only concave; for 1/8", only convex). M10x1.00 and x1.25 can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 13 H650-xxC = straight H653-xxC = bent at 45° H654-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP (H650 only) -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H650-31C = M10 x 1.00, straight
	internal thread, sliding nut, with NUT with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). M10x1.00 and x1.25 can also be supplied in angled versions, bent up to 90°. Simply let us know the required angle. SW 17 H663-xxC = straight H663-xxC-45 = bent at 45° H663-xxC-90 = bent at 90° Simply replace -xx with the corresponding thread size -03 = 3/8"x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H663-31C = M10 x 1.00, straight H663-31C-VAG = straight, double-stepped
	Internal thread, movable nut, stepped, with GROOVE with double sealing cone: convex (outer cone) / concave (inner cone), Can also be supplied bent at angles up to 90°. Simply specify the required angle. SW 17 H675-31C = straight H675-31C-45 = bent at 45° H675-31C-90 = bent 90°
	Internal thread, movable nut, double-stepped, with NUT with double sealing cone: convex (outer cone) / concave (inner cone), SW 17 H663-31C-VAG = straight, double-stepped
	External thread, fixed with double sealing cone: convex (outer cone) / concave (inner cone) (for 3/8" UNF, concave only), and sealing surface for copper sealing ring! SW17 H657-xxC = straight H658-xxC = straight, extra long H659-03C = 3/8", straight, long H669-31C = M10x1.00, straight, long H669-32C = M10x1.25, straight, long Simply replace -xx with the appropriate thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H657-31C = M10x1.00, straight
	internal thread, fixed with sealing cone, SW17 H660-31C = straight, concave H660-31C-SQUARE = straight, concave H670-31C = straight, with groove, convex
	Hose Fittings / Mounts      GROMMET, rubber, black       HLL-001, plastic, black HLL-002, plastic, black       HLL-003, plastic, black HLL-004, plastic, black   HLL-005, plastic, black HLL-006, plastic, black       HLL-007, rubber, black

Brake line kits from HEL Performance come with ABE or a parts certificate!

The required hollow screws and copper gaskets are automatically included in the line kit!
_{(Applies only to line kits HBFxxxx, HBRxxxx, HBCxxxx; not to custom-made individual lines)}

HEL Performance also offers brake line kits with the so-called “alternative routing method,” including ABE certification!

When ordering, please specify the desired line color, the vehicle type, and the vehicle’s type code. (Code number under sections 2.1 and 2.2 on the vehicle registration certificate)

You can choose from 14 line colors at no extra charge:
Transparent, Carbon Look, Black, White, Red-Transparent, Red, Orange, Yellow, Green, Blue-Transparent, Blue, Transparent-Purple, Pink

For many models, we offer various routing options:

OEM, like the original (Standard Kit): The brake lines match an original replacement part in length, number, and routing.

Alternatively, Full Length: Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.

Alternatively, Over the Mudguard: One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the mudguard to the left brake caliper.

You can also find stainless steel braided brake lines for other models and configurations on our website at www.helperformance.de(please click on the link)

HEL Performance Stainless Steel Braided Brake Line

The General Operating Permit (ABE) is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

Note: The photos shown are examples and do not depict the brake line kit for the specified vehicle! When placing your order, you can specify your desired hose color. The lines will then be custom-made “fresh” for you according to your preferences and specifications!

Technical Specifications:

You can also find tips and instructions in the "Questions and Answers" section _{(click the link)}:  

-

ALUMINIUM sealing rings for 10mm ring connections/screws

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

High-performance titanium-based lubricant in paste form.
This high-quality universal product covers the majority of all lubrication and corrosion problems from -180°C to +1,400°C. Free of nickel and aluminum, protects against corrosion, prevents seizing of screw connections and plug connections as well as vibration noises (e.g. brake squeal), resistant to seawater and most acids, alkalis, gases and vapors, abrasion-resistant, long-term corrosion protection, also prevents galvanic contact corrosion, pressure load up to max. 2,400 kp/cm² (= 23,400 N/cm²).

The real alternative to ceramic pastes and other "magic agents"!

Ideally suited for nuts and bolts that are either moved very frequently or only very rarely.

This high-performance lubricant is extremely temperature-resistant, up to +1400°C.
Exhaust and manifold bolts, wheel nuts/bolts, turbocharger bolts etc.
Is also recommended by the manufacturer for use on the back of disk brake pads (backing plate, outside) as an "anti-squeak"!

The carrier material (grease) contains titanium oxide particles.
As these are already oxidized, they cannot react further with oxygen.
Titanium oxide particles are extremely pressure-resistant and can withstand very high frictional forces.
Titanium oxide particles are virtually neutral towards all other metals. They are therefore also suitable for protecting critical materials against electrochemical corrosion.

The high-performance lubricant has proven its worth in extreme conditions, e.g. metals in seawater or in sewage treatment plants.

A MUST for every mechanic and motor sports enthusiast.

Scope of delivery:
1 bag of GMP-1004, content 4 grams (or when ordering 2 pieces = 1 double bag with 2 x 4 grams), color: dark grey

HEL Performance Hose for Expansion Tanks on Brake Pumps, etc. (OEM quality)

Universally compatible with brake pumps, fittings, and expansion tanks.

Inner diameter: approx. 5.8 mm
Outer diameter: approx. 9.8 mm

Material: EPDM, brake fluid-resistant*

(*DOT 3 & 4, DOT 5, DOT 5.1, and many racing brake fluids)

HEL Performance brake pad retaining pin with hole for retaining wire. (1 piece)

Suitable for HEL brake caliper 100/108mm.

Dimensions : Length approx. 51mm (for MK-I) or approx. 57mm (MK-II)
Thread : M7x1.00
Material : Stainless steel

Scope of delivery: 1 piece pad retaining pin, M7

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL Performance mounting bracket 75mm made of stainless steel. E.g. AG container or similar

Small, practical item made of stainless steel. Laser cut. Universal use.
The holder is very easy to bend and shape by hand, e.g. to optimally position the expansion tank.

Dimensions: approx. 75 x 2mm (measured in the middle of the hole)

Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Stainless steel brake pistons for brake calipers from HEL Performance with 32mm piston diameter

Scope of delivery:

1 x 32mm piston

Note: When replacing the pistons, we recommend using new sealing and dust rings.

WARNING: Work on brake components must be carried out professionally. There is a danger to life!

Specialist knowledge and expertise is required for servicing brake components. If you are not 100% sure that you can service the brake components yourself, have the maintenance/repair work carried out by specialists.

You can also send your brake pump or brake caliper to us for servicing. We will check the parts sent in and send you a quotation for repair/maintenance.

Spacer for adjusting the lever ratio on HEL Performance HMC16 and HMC19 radial brake master cylinders—1st generation

Offset: 1 mm

Compatible with HEL Performance "HMC" series radial brake master cylinders (1st generation)

Material: Aluminum

Package Contents: 1 x insert

Steel-braided brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Repair kit for the radial brake pump 19mm HMC-1 from HEL Performance, 13-piece

The repair kit contains the following parts:

WARNING: Work on brake components must be carried out professionally. There is a danger to life!

Specialist knowledge and expertise is required for servicing brake components. If you are not 100% sure that you can service the brake components yourself, have the maintenance/repair work carried out by specialists.

You can also send your brake pump or brake caliper to us for servicing. We will check the parts sent in and send you a quotation for repair/maintenance.

HEL Performance brake pad retaining pin with hole for retaining wire. (1 piece)

Suitable for HEL brake caliper 100/108mm.

Dimensions : Length approx. 51mm (for MK-I) or approx. 57mm (MK-II)
Thread : M7x1.00
Material : Stainless steel

Scope of delivery: 1 piece pad retaining pin, M7

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Stainless steel brake pistons for brake calipers from HEL Performance with 32mm piston diameter

Scope of delivery:

1 x 32mm piston

Note: When replacing the pistons, we recommend using new sealing and dust rings.

WARNING: Work on brake components must be carried out professionally. There is a danger to life!

Specialist knowledge and expertise is required for servicing brake components. If you are not 100% sure that you can service the brake components yourself, have the maintenance/repair work carried out by specialists.

You can also send your brake pump or brake caliper to us for servicing. We will check the parts sent in and send you a quotation for repair/maintenance.

Stainless steel spacers, cylindrical shape, for M10 screws. Various lengths

Suitable for HEL Performance brake callipers

Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Stainless steel screw with Allen head, conical shape, M10x1.25. Various lengths

Suitable for HEL Performance brake callipers

Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)