HEL Performance (UK)

Axial-radial adapter kit R+L HB-100-62-4.5OFF

Hole spacing on the original fork: 62mm
Offset: 4.5mm
Suitable for brake caliper HEL Performance: V1 - 100mm, V2 -108mm

ABE/parts certificate: NO, in preparation

Suitable for:

Axial-Radial Adapter Kit R+L HB-108-100-2.0OFF

Hole spacing on the original fork: 100 mm
Offset: 2.0 mm
Compatible with HEL Performance brake caliper: V1 - 108 mm, V2 -108mm

ABE/Parts Certificate: NO, in preparation

Compatible with:

Axial-Radial Adapter Kit R+L HB-108-90-2OFF

Hole spacing on the original fork: 90 mm
Offset: 2.0 mm
Compatible with HEL Performance brake caliper: V1 - 108 mm, V2 -108mm

Compatible with:

GMS brake line holder, 3D printing, flexible filament

The holder was designed to optimally attach brake lines to any fork or other tubes.
The holder and brake line are each attached with a separate cable tie.

Suitable for steel flex brake lines from HEL Performance
Use on lines and cables from other manufacturers may need to be tested.

Scope of delivery: 1 x holder
Material: Plastic (3D print)

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®stainless steel adapter for quick disconnect couplings
Banjo 10mm and fixed internal thread 3/8 "x24UNF

This adapter enables the assembly of quick disconnect couplings with 3/8 "x24UNF male thread and sealing cone.

As a special feature, this new adapter is designed so that e.g. quick disconnect couplings type SPH.03 of the Stäubli brand can be screwed in directly. The length of the fixed internal thread in size 3/8 "x24UNF is designed so that the coupling fits perfectly. Sealing is provided by the integrated sealing cone.

The adapter can be cranked up to 90° or bent sideways. The combination of cranked and bent sideways (RB or LB) is also possible at no extra charge. If required, please enter the desired angle in the comments field.

The stainless steel adapter has 1 x banjo 10mm and 1 x internal thread 3/8 "x24UNF !

Scope of delivery: 1 x stainless steel adapter

Length from center of banjo to end of internal thread = approx. 43mm

Length including quick disconnect coupling (Stäubli SPH.03) and connection with press sleeve = approx. 13.5cm
(measured on the straight adapter)

Note: The quick disconnect couplings shown are not included in the scope of delivery! They are for illustrative purposes only!

You can find steel flex brake line kits with model selection in our specially designed online store at:
motorrad.helperformance.de (please click on the link)

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®stainless steel adapter quick disconnect couplings, black burnished version (METAL-BLACK)
Banjo 10mm and fixed internal thread 3/8 "x24UNF

(Pictures in black will follow shortly)

This adapter enables the installation of quick disconnect couplings with 3/8 "x24UNF external thread and sealing cone.

As a special feature, this new adapter is designed so that e.g. quick disconnect couplings of the type SPH.03 of the Stäubli brand can be screwed in directly. The length of the fixed internal thread in size 3/8 "x24UNF is designed so that the coupling fits perfectly. Sealing is provided by the integrated sealing cone.

The adapter can be cranked up to 90° or bent sideways. The combination of cranked and bent sideways (RB or LB) is also possible at no extra charge. If required, please enter the desired angle in the comments field.

The stainless steel adapter has 1 x banjo 10mm and 1 x internal thread 3/8 "x24UNF !

Scope of delivery: 1 x stainless steel adapter

Length from center of banjo to end of internal thread = approx. 43mm

Length including quick disconnect coupling (Stäubli SPH.03) and connection with press sleeve = approx. 13.5cm
(measured on the straight adapter)

Note: The quick disconnect couplings shown are not included in the scope of delivery! They are for illustrative purposes only!

You can find steel flex brake line kits with model selection in our specially designed online store at:
motorrad.helperformance.de (please click on the link)

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®stainless steel adapter set for radial hand brake pumps
Incl. copper sealing rings and banjo bolt

This adapter set enables the installation of steel flex brake lines on radial handbrake pumps.
The problem is often that the connection is not accessible.
The adapter makes this possible.

To date, no ABE or registration has been required for this adapter. We therefore classify this part as "registration-free".

Please select one of the following screw combinations:

With two lines to the adapter:
1 x HS M10x1.00 1 x DHS M10x1.00
1 x HS M10x1.25 1 x DHS M10x1.00

With one line to the adapter:
1 x HS M10x1.25 1 x HS M10x1.00
2 x HS M10x1.00

The stainless steel adapter has 1 x internal thread M10x1.00!

Scope of delivery: 1 x stainless steel adapter, 1 x stainless steel banjo bolt 1 x stainless steel double banjo bolt (or 2 x banjo bolt), up to 5 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® Stainless Steel Adapter M14x1.25 Male Thread - M10x1.00 Female Thread

Package Contents: 1 x stainless steel adapter, 1 x M14x1.25 male thread, and 1 x M10x1.00 female thread
Material: Stainless steel
Weight: approx. 12 g

Steel-braided brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling on the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel braiding
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

HEL-Performance® Stainless Steel Reducer: M10x1.00 Male Thread to M8x0.75 Female Thread

This reducer fits, for example, the sensor of a Duacti Paniagale V4 on the rear brake line from the brake master cylinder to the ABS.

The stainless steel adapter has 1 x M8x0.75 female thread and 1 x M10x1.00 male thread!
Length: approx. 14 mm
Total length including male thread: approx. 22 mm

Package contents: 1 x stainless steel adapter

Steel-braided brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

HEL-Performance® Stainless Steel Adapter Set M10x1.00 Female/Male Threads

This adapter set allows ring fittings to be mounted on internal-threaded connections, such as those with a swivel nut
With connections featuring a floating nut, it is not possible to simply screw in a hollow screw. This would not provide a seal.
The adapter makes this possible because the external thread seals against the sealing cone at the bottom. The hollow screw is screwed into the internal thread and seals via a copper sealing ring (or aluminum, etc.)

The stainless steel adapter has 1 x M10x1.00 internal thread and 1 x M10x1.00 external thread!
Length: approx. 20 mm
Total length with external thread: approx. 31 mm

Package contents: 1 x stainless steel adapter

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner lining with stainless steel sheath
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certificates, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not listed—or not yet listed—please contact us directly.

(** Included if required)

HEL-Performance® copper sealing rings for 10mm ring connections/screws

Nominal dimensions: 10x15x1.5mm
Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® copper sealing rings for 10mm ring connections/screws

Nominal dimensions: 10x15x2mm

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® copper sealing rings for 11mm ring connections/screws

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® copper sealing rings for 12mm ring connections/screws

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® copper sealing rings for 14mm ring connections/screws

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® copper sealing rings for 5mm ring connections/screws

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® copper sealing rings for 6mm ring connections/screws

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® copper sealing rings for 8mm ring connections/screws

Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel banjo bolt, RACE-BOLT, M10x1.00 - Long version for Stäubli-Banjo quick disconnect coupling
Incl. copper sealing rings

Specially designed banjo bolt with perforated head for use with locking wire. For racing, or simply because it looks good!

Scope of delivery: 1 x stainless steel race bolt banjo bolt, 2 x copper sealing ring, long version

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel banjo bolt, RACE-BOLT, M10x1.00 - Long version for Stäubli-Banjo quick disconnect coupling
Incl. copper sealing rings

Specially designed banjo bolt with perforated head for use with locking wire. For racing, or simply because it looks good!

Scope of delivery: 1 x stainless steel race bolt banjo bolt, 2 x copper sealing ring, long version

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® Stainless Steel Hollow Screw, RACE-BOLT, M10x1.00
Includes copper sealing rings

Specially designed hollow screw with a perforated head for use with lock wire. For racing—or simply because it looks great!

Package contents: 1 x stainless steel Race-Bolt hollow screw, 2 x copper sealing rings

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow bolts** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner lining with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

(** is included, if needed)

HEL-Performance® Stainless Steel Hollow Screw, RACE-BOLT, M10x1.25
Includes copper sealing rings

Specially designed hollow screw with a perforated head for use with locking wire. For racing—or simply because it looks great!

Package contents: 1 x stainless steel Race-Bolt hollow screw, 2 x copper sealing rings

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow bolts** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or is not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel banjo bolt, M10x1.00
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel blind plug, 3/8 "x24UNF, hexagon head 10 mm width across flats

Incl. copper sealing ring

For use e.g. to seal the ABS module if it is not fitted with brake lines!

Scope of delivery: 1 x stainless steel blind plug, 1 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)