HEL Performance (UK)

3-way distributor 180°, with internal thread 3 x M10x1.00, steel, galvanized

Scope of delivery: 1 x distributor, with 6.5mm hole for mounting on the vehicle

Material: Steel, galvanized
Dimensions: approx. 31 x 25 x 15 mm (w/h/t)
Weight: approx. 25 gr.

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

4-way distributor with internal thread 3 x M10x1.00, 1 x M12x1.00

The distributor is ideal for brake line kits on Harley-Davidson models with ABS brake system and single front disc.

Scope of delivery: 1 x distributor, with 6.5mm hole for mounting on the vehicle, 2 x sealing olives
Material: Anodized aluminium
Dimensions: approx. 50 x 21 x 15 mm
Weight: approx. 33 gr.

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 2-way distributor with internal thread 2 x M3/8 "x24 UNF

The distributor was developed for brake line kits on Harley-Davidson models. The original models have a permanently pressed distributor, which is replaced by this one.

Scope of delivery: 1 x distributor, with 6.5mm hole for mounting on the vehicle
Material: Aluminum
Dimensions: approx. 115 x 30 x 16 mm
Weight: approx. 88 gr.

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 2-way distributor with internal thread 2 x M3/8 "x24 UNF, black

The distributor was developed for brake line kits on Harley-Davidson models. The original models have a permanently pressed distributor, which is replaced by this one.

Scope of delivery: 1 x distributor, with 6.5mm hole for mounting on the vehicle
Material: Aluminium, black anodized
Dimensions: approx. 115 x 30 x 16 mm
Weight: approx. 88 gr.

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 3-way manifold with external thread 3 x M3/8 "x24 UNF, 3 x convex sealing cone

Universal distributor with 3 x external thread, 3/8 "x24UNF, with 6.5mm mounting hole

Scope of delivery: 1 x distributor, with 6.5mm hole for mounting on the vehicle
Material: Stainless steel
Dimensions: approx. 115 x 30 x 16 mm
Weight: approx. 88 gr.

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 4-way distributor block for ABS system, e.g. for Harley-Davidson, with internal thread 1 xM12x1.00, 1 x M10x1.00, 3 x M3/8 "x24 UNF

The distributor was developed for brake line kits on Harley-Davidson models with ABS. The original models have a permanently pressed distributor, which is replaced by this one.

Scope of delivery: 1 x distributor, with 6.5mm hole for mounting on the vehicle
Material: Aluminum
Dimensions: approx. 54 x 43 x 15 mm
Weight: approx. 79 gr.

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Engine connection as a replacement part for the GSX1400 K1-K8 (2001-2008) oil cooler kit (price per piece)

Contents:
1 x adapter, aluminum, black anodized,
1 x O-ring

HEL-Performance® High-Performance Sensor HEL-PS1-1010-10 0–10 bar, M10x1.00, 8–32 VDC Power Supply

High-end sensors, made in the EU! The price has already been significantly reduced due to the encouragingly high demand!

Model: A1) 0–10 bar, M10x1.00

• Measuring range: 0–10 bar (absolute)
• Power supply: 8–32 VDC
• Output (signal): 0.5 to 4.5 volts
• Thread: M10x1.00, 90° sealing cone and flat-sealing face,
• Hex wrench size SW 16
• Tightening torque: max. 15 Nm

Each sensor undergoes extensive inspection procedures and testing before shipment.

• 24-hour temperature compensation—cold/hot pressure calibration across the entire temperature and measurement range. 
• Operating temperature range: -40°C to +150°C
• Total error (total error band) over the operating temperature range (full scale): less than 0.5%
  (Not to be confused with accuracy specifications or error budgets provided by many manufacturers. By definition, these apply only to measurements taken at room temperature (22°C) and are therefore not relevant for use in motorsports)
• Leak test/pressure test using HELIUM (the second-smallest atom.....)
• Housing laser-welded (no additional seals required inside the sensor)
• Suitable for both engine oils and brake fluids. 
• Stainless steel housing
• M10x1.00, with 90° sealing cone and flat-sealing surface, SW 16
• Includes 1 m high-temperature-resistant cable (HT cable, open ends)

Also available in the following versions:

A1) 0–10 bar, 8–32 VDC

A2) 0–10 bar, 8–32 VDC

B1) 0–10 bar, 4.7–6 VDC

B2) 0–100 bar, 4.7–6 VDC

HEL-Performance® High-Performance Sensor HEL-PS1-1010-100, 0–100 bar, M10x1.00, 8–32 VDC power supply

High-end sensors, made in the EU! The price has already been significantly reduced due to the encouragingly high demand!

Model: A2) 0–100 bar, M10x1.00

• Measuring range: 0–100 bar (absolute)
• Power supply: 8–32 VDC
• Output (signal): 0.5 to 4.5 volts
• Thread: M10x1.00, 90° sealing cone and flat-sealing face,
• Hex wrench size SW 16
• Tightening torque: max. 15 Nm

Each sensor undergoes extensive inspection procedures and testing before shipment.

• 24-hour temperature compensation—cold/hot pressure calibration across the entire temperature and measurement range. 
• Operating temperature range: -40°C to +150°C
• Total error band across the operating temperature range (full scale): less than 0.5%
  (Not to be confused with accuracy specifications or error budgets provided by many manufacturers. By definition, these refer only to measured values at room temperature (22°C) and are therefore not relevant for use in motorsports)
• Leak test/pressure test using HELIUM (the second-smallest atom....)
• Housing laser-welded (no additional seals required inside the sensor)
• Suitable for both engine oils and brake fluids. 
• Stainless steel housing
• M10x1.00, with 90° sealing cone and flat-sealing surface, SW 16
• Includes 1 m of high-temperature-resistant cable (HT cable, open ends)

Also available in the following versions:

A1) 0–10 bar, 8–32 VDC

A2) 0–10 bar, 8–32 VDC

B1) 0–10 bar, 4.7–6 VDC

B2) 0–100 bar, 4.7–6 VDC

HEL-Performance® High-Performance Sensor HEL-PS2-1010-10, 0–10 bar, M10x1.00, 4.7–6 VDC power supply

High-end sensors, made in the EU! The price has already been significantly reduced due to the encouragingly high demand!

Model: B1) 0–10 bar, M10x1.00

• Measuring range: 0–10 bar (absolute)
• Power supply: 4.7–6 VDC
• Output (signal): 0.5 to 4.5 volts
• Thread: M10x1.00, 90° sealing cone and flat-sealing face,
• Hex wrench size SW 16
• Tightening torque: max. 15 Nm

Each sensor undergoes extensive inspection procedures and testing before shipment.

• 24-hour temperature compensation—cold/hot pressure calibration across the entire temperature and measurement range. 
• Operating temperature range: -40°C to +150°C
• Total error (total error band) over the operating temperature range (full scale): less than 0.5%
  (Not to be confused with accuracy specifications or error budgets provided by many manufacturers. By definition, these refer only to measurements taken at room temperature (22°C) and are therefore not relevant for use in motorsports)
• Leak test using helium (the second-smallest atom.....)
• Housing laser-welded (no additional seals required inside the sensor)
• Suitable for both engine oils and brake fluids. 
• Stainless steel housing
• M10x1.00, with 90° sealing cone and flat-sealing surface, SW 16
• Includes 1 m high-temperature-resistant cable (HT cable, open ends)

Also available in the following versions:

A1) 0–10 bar, 8–32 VDC

A2) 0–10 bar, 8–32 VDC

B1) 0–10 bar, 4.7–6 VDC

B2) 0–100 bar, 4.7–6 VDC

HEL-Performance® High-Performance Sensor HEL-PS2-1010-100, 0–100 bar, M10x1.00, 4.7–6 VDC power supply

High-end sensors, made in the EU! The price has already been significantly reduced due to the encouraging high demand!

Model: B2) 0–100 bar, M10x1.00

• Measuring range: 0–100 bar (absolute)
• Power supply: 4.7–6 VDC
• Output (signal): 0.5 to 4.5 volts
• Thread: M10x1.00, 90° sealing cone and flat-seal surface,
• Hex wrench size SW 16
• Tightening torque: max. 15 Nm

Each sensor undergoes extensive inspection procedures and tests before shipment.

• 24-hour temperature compensation—cold/hot pressure calibration across the entire temperature and measurement range. 
• Operating temperature range: -40°C to +150°C
• Total error (total error band) across the operating temperature range (full scale): less than 0.5%
  (Not to be confused with accuracy specifications or error budgets provided by many manufacturers. By definition, these refer only to measured values at room temperature (22°C) and are therefore not relevant for use in motorsports)
• Leak test/pressure test using HELIUM (the second-smallest atom.....)
• Housing laser-welded (no additional seals required inside the sensor)
• Suitable for both engine oils and brake fluids. 
• Stainless steel housing
• M10x1.00, with 90° sealing cone and flat-sealing surface, SW 16
• Includes 1 m high-temperature-resistant cable (HT cable, open ends)

Also available in the following versions:

A1) 0–10 bar, 8–32 VDC

A2) 0–10 bar, 8–32 VDC

B1) 0–10 bar, 4.7–6 VDC

B2) 0–100 bar, 4.7–6 VDC