HEL Performance (UK)

HEL-Performance® stainless steel banjo bolt, M12x1.00x18 (18mm long)
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 4-Piston Radial Brake Caliper (1 piece)

HEL Performance brake calipers are available with a MotoGP-inspired nickel coating. Each caliper is equipped with 2 pad retaining pins. To replace the brake pads, simply unscrew these pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to remove all air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons rather than heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as forging is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of a two-piece brake pad assembly with two brake pads per caliper.

• 4-piston (32 mm) stainless steel caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts in 100 mm and 108 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• Complete with spacers and necessary screws

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various race tracks in Spain and England, as well as in street use, these pads have delivered outstanding performance and results. The EP pad compound has ABE approval; the GPX pad compound is a pure racing compound without ABE approval. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100 mm hole spacing = 30 mm offset
• Brake caliper with 108mm hole spacing = 22.5mm offset

Package Contents:

• 1 x CNC-machined brake caliper (R or L)
• 2 mounting screws
• 8 spacer rings (2 each in 5, 7, 12, and 14 mm)
• 1 x stainless steel hollow screw with copper sealing ring

For more information, please visit the following link

Note: HEL Performance brake master cylinders and brake calipers are not compatible with Castrol SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feel in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel banjo bolt, M12x1.50
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® Stainless Steel Hollow Screw, M12x1.25
Includes copper sealing rings

Length below hex head: short: approx. 20 mm or long: approx. 22.9 mm

Contents: 1 x stainless steel hollow screw, 2 x copper sealing rings

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if needed)

HEL-Performance® 4-Piston Radial Brake Caliper (1 Pair) (INTRODUCTORY PRICE)

HEL Performance brake calipers are available with a MotoGP-inspired nickel coating. Each caliper is equipped with 2 pad retaining pins. To replace the brake pads, simply unscrew the pins briefly and swap out the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 715 grams (without pads) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the type of fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 4-piston (32 mm) stainless steel brake caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• Radial mounts available in 100 mm, 108 mm, and NOW also in 130 mm for most modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.
• with spacers

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers. We currently offer EBC FA390 brake pads as an option. In our extensive testing with renowned top riders on various race tracks in Spain and England, as well as in street use, these pads have delivered outstanding performance and results. The EP pad compound has ABE certification; the GPX pad compound is a pure racing compound without ABE certification. Comparable brake pad types for: SBS = 809, DP = DP950, Vesrah = VD-170, Ferodo = FDB2181, CL-Brakes = 1134 (Source: SBS.dk), TRW = MCB755 (Source: trwmoto.com)

Technical Information:

• Brake caliper with 100mm bolt pattern = 30mm offset
• Brake caliper with 108 mm bolt pattern = 22.5 mm offset
• Brake caliper with 130mm bolt pattern = 22.5mm offset

Package Contents:

• 2 x CNC-milled brake calipers (R+L)
• 4 spacer rings, 6 mm thick
• 2 x stainless steel hollow screws with copper sealing rings
•  Mounting screws not included; please order them separately if needed.

For more information, please visit the following link

Note: HEL Performance brake master cylinders and calipers are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail.

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No expansion of the lines at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the brake system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** Included if required)

HEL-Performance® 2-piston CNC brake caliper, axial, 64 mm bore spacing, 2 x 30 mm stainless steel pistons

The rear brake caliper from HEL Performance is equipped with 1 pad retaining pin. To replace the brake pads, simply unscrew this pin briefly and replace the pads. The calipers should be blown out with air before reinstallation to ensure that the internal surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that a complete loop runs through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh approximately 420 grams (without pads and retaining pin) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons rather than heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as forging is unable to produce these details. We offer the very highest product quality. The finish is breathtaking, with every part machined to CNC precision. We maximize weight savings and minimize material usage. Radial mounting of two-piece brake pads with two pads per caliper.

• 2-stainless-steel-piston (30 mm) caliper design.
• The brake caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• 64 mm axial mounts for many modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers.

We currently offer EBC-type brake pads in various compound options as an option.

Package Contents:

• 1 x CNC-machined brake caliper
• 1 x stainless steel hollow screw with copper sealing ring

Compatible accessories, not included: EBC-type brake pads 

For more information, please visit the following link

Note: Brake master cylinders and calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may, under certain circumstances, cause seals to fail.

HEL-Performance® 2-Piston CNC Brake Caliper, Axial, 84 mm, 2 x 32 mm Pistons

The rear brake caliper from HEL Performance is equipped with 1 pad retaining pin. To replace the brake pads, simply unscrew this pin briefly and replace the pads. The calipers should be blown out with air before reinstallation to ensure that the inner surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the brake caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 480 grams (excluding pads and retaining pin) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process is unable to produce these details. We offer the very highest product quality. The finish is stunning, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 2-stainless-steel-piston (32 mm) caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• 84 mm axial mounting for many modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers.

We currently offer EBC FA266 brake pads in various compound options as an option.

Package Contents:

• 1 x CNC-machined brake caliper
• 1 x stainless steel hollow screw with copper sealing ring

Compatible accessories (not included): EBC Type FA266 brake pads

For more information, please visit the following link

Note: Brake master cylinders and brake calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail under certain conditions.

HEL-Performance® Radial Hand Brake Master Cylinder, 19 or 16 mm Piston Diameter! HMC-MK-I

!!! 2025 Price Reduction: Now Only €289.00 MSRP !!!

The HEL Performance radial brake master cylinder has now become a staple of the racing scene.
Machined from solid material (housing and lever) and a real steal for less than 300 euros!

It is available in two versions:
a) 19 mm piston diameter ( 19 x 18, 19 x 19, 19 x 20 mm)
b) 16 mm piston diameter ( 16 x 18, 16 x 19, 16 x 20mm)

Both the housing and the lever are milled from solid material at HEL Performance in Exeter (UK) using brand-new CNC machining centers. The housing is nickel-plated, and the lever is black anodized.

The newly developed brake levers come with two inserts that allow the pump’s gear ratio to be adjusted as needed.

Insert 1) has a center hole, while Insert 2) has an off-center hole.

Simply swap or rotate the insert to set the desired gear ratio for optimal control and brake feel.

The pumps are designed for use onboth the right and left sides of the handlebars !!! The bleed nipples and the brake line connection have the same thread (M10x1.00). This allows either the brake line or, optionally, the bleed nipple to be used at both holes.

Weight: Approx. 285 grams
Material : Housing / Lever = 6082-T6 aluminum, machined from solid
                            Pistons and screws = stainless steel
Housing: hard-coated or anodized
Lever: Anodized

Package Contents:
1 x radial brake cylinder with brake lever
2 x inserts for adjusting the lever ratio
1 x M10x1.00 stainless steel hollow screw with copper O-rings
Installation/Maintenance Instructions

An ABE is in the works!!

#WhatsStoppingYou

Note: HEL Performance brake master cylinders and calipers are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

HEL-Performance® Radial Hand Brake Master Cylinder V2 / "3-Seal Technology" NEW PRODUCT 2025
Available with a 19mm or 16mm piston diameter!

2nd generation of the popular radial brake master cylinder from HEL Performance.
Machined from solid metal (housing and lever)—and for less than 400 euros, it’s a real steal in this price range!
The brake master cylinder was redesigned with great care and expertise.

• 2 piston diameters: 16 and 19 mm
• Lever swap can be done in just a few seconds with a single screw
• 3 lever lengths: S2, M3, L4 (the M3 version is installed as standard; S2 and L4 are available as accessories)
• Sealed bleed nipples
• Brake pump with“3-Seal Technology”
• CNC-machined housing and lever
• CNC-milled folding lever as standard
• CNC-machined brake fluid reservoir available as an accessory
• Mechanical lever ratio easily adjustable.
  a) 19 mm piston diameter ( 19 x 18, 19 x 19, 19 x 20 mm)
  b) 16 mm piston diameter ( 16 x 18, 16 x 19, 16 x 20mm)
• Integrated micro brake light switch
• Remote adjuster available as an accessory

Both the housing and the lever are milled from solid material at HEL Performance in Exeter (UK) using state-of-the-art CNC machining centers. The housing features a high-quality, modern CERACOTE coating, and the lever is anodized. (CERACOTE coating is also available in many colors as a special order)

The mechanical lever ratio can be easily adjusted to your personal preference using an integrated component. Super fast and convenient.
The newly developed brake lever is mounted to the housing with just a single screw. This makes it very easy and quick to replace the entire unit.

Weight: Approx. 300 grams
Material: Housing / Lever = 6082-T6 aluminum, machined from solid
                            Pistons and screws = stainless steel
Housing: CEARCOTE coating
Lever: Anodized

Package Contents:
1 x radial brake cylinder with brake lever and MICRO brake light switch
1 x M10x1.00 stainless steel hollow screw with copper sealing rings
Installation/Maintenance Instructions

An ABE is in the works!!

#WhatsStoppingYou

Note: Brake master cylinders and calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may, under certain circumstances, cause seal failure.

HEL-Performance® Radial Hand Brake Master Cylinder V2 / "3-Seal Technology" Race Edition (not for road use)
Available with a 19mm or 16mm piston diameter!

2nd generation of the popular radial brake master cylinder from HEL Performance. But in the Race Edition.
Machined from solid (housing and lever) 

• Piston diameters: 17.5 and 19 mm
• Lever can be swapped in just a few seconds with a single screw
• 3 lever lengths: S2, M3, L4 (M3 is standard; S2 and L4 are available as accessories)
• Bleed nipples sealed
• Brake master cylinder with "3-Seal Technology"
• CNC-machined housing and lever
• CNC-milled folding lever as standard
• CNC-machined brake fluid reservoir available as an accessory
• Mechanical lever ratio easily adjustable.
  a) 19 mm piston diameter ( 19 x 18, 19 x 20 mm)
  b) 16 mm piston diameter ( 16 x 18, 16 x 20mm)
• WITHOUT micro-stop light switch
• Remote adjuster available as an accessory

Both the housing and the lever are milled from solid stock at HEL Performance in Exeter (UK) using state-of-the-art CNC machining centers. The housing features a high-quality, modern CERACOTE coating; the lever is anodized. (CERACOTE coating is also available in many colors as a special order)

The mechanical lever ratio can be easily adjusted to your personal preference using an integrated component. Super fast and convenient.
The newly developed brake lever is mounted to the housing with just a single screw. This makes it very easy and quick to replace the entire unit.

Weight: Approx. 300 grams
Material: Housing / Lever = 6082-T6 aluminum, machined from solid
                            Pistons and screws = stainless steel
Housing: CEARCOTE coating
Lever: Anodized

Package Contents:
1 x radial brake cylinder with brake lever and MICRO brake light switch
1 x M10x1.00 stainless steel hollow screw with copper sealing rings
Installation/Maintenance Instructions

An ABE is in the works!!

#WhatsStoppingYou

Note: Brake master cylinders and calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail under certain conditions.

HEL-Performance®stainless steel breather banjo bolt, M10x1.00
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be bled directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, 2 x copper sealing ring, 1 x dust cap

Steel flex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®stainless steel breather banjo bolt, M10x1.00, METAL Black
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be vented directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, black burnished, 2 x copper sealing rings, 1 x dust cap

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®CNC reservoir for radial hand brake pump V2 NEW PRODUCT 2025

Milled from the solid.

• CNC milled reservoir for brake fluid
• Inspection glass for fill level
• Can be used on the right and left of the handlebars (brake/clutch)

The reservoir is screwed onto the connection to the reservoir of the new MK-2 radial brake pump using an M12 screw. Can be easily adjusted to the optimum position by twisting. Housing milled from solid material on modern CNC machining centers at HEL Performance in Exeter (UK). Housing with high-quality and modern CERACOTE coating. (CERACOTE coating is also available in many colors as a special order)

Weight : Approx. 300 grams
Material : Housing / cover = 6082-T6 aluminum, milled from the solid
Housing : CEARCOTE coating

Scope of delivery:
1 x expansion tank for radial brake cylinders
1 x stainless steel banjo bolt M12x1.00 with copper sealing rings
Assembly instructions

#WhatsStoppingYou

Note: Brake pumps and brake calipers from HEL Performance are not suitable for use with SRF Racing brake fluid from Castrol! The use of this brake fluid may lead to defective seals.

HEL-Performance®stainless steel breather banjo bolt, M10x1.25
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be vented directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, 2 x copper sealing ring, 1 x dust cap

Steel flex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®stainless steel breather banjo bolt, M10x1.25, METAL Black
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be vented directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, black burnished, 2 x copper sealing rings, 1 x dust cap

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®stainless steel breather banjo bolt, 3/8" x 24 UNF/JIC
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be vented directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, 2 x copper sealing ring, 1 x dust cap

Steel flex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® Clutch Fitting, with a flip lever! ( The image does not show the flip lever)

The assembly is designed to visually match HEL Performance’s radial brake master cylinders.
On vehicles with mechanical clutch actuation (via Bowden cable), this allows for a visually uniform appearance on both sides.
It is often difficult to find a matching lever assembly for both sides.

Both the housing and the lever are milled from solid material at HEL Performance in Exeter (UK) using brand-new CNC machining centers.

A folding lever will be available as an accessory.

HEL-Performance®stainless steel air vent double banjo bolt, M10x1.00
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be vented directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, 3 x copper sealing ring, 1 x dust cap

Steel flex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®stainless steel double banjo bolt, M10x1.25
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be vented directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, 3 x copper sealing ring, 1 x dust cap

Steel flex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® Rear Brake Master Cylinder, 13mm Piston Diameter!

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new brake master cylinder for the rear wheel.

It is available in two variants and versions:
a) 13mm piston diameter, black anodized housing
b) 13mm piston diameter, nickel-plated housing

c) 13mm piston diameter, black anodized housing, 2 x M10x1.00 connections for use with, e.g., a thumb brake
d) 13 mm piston diameter, nickel-plated housing, 2 x M10x1.00 connections for use with, for example, a thumb brake

HEL-Performance® Combined Rear Brake Pump, 13mm Piston Diameter!

The combination brake pump for the rear wheel was developed so that a pump on the handlebars (whether thumb brake or pull brake) can be used in conjunction with the foot brake for the rear wheel. This is often required by the rules. In such cases, the foot brake must remain in place. However, an additional hand-operated brake pump is permitted.

The new combination brake pump has two connections:
            A) M12x1.00 thread for the handlebar-mounted pump (e.g., thumb brake pump)
            B) M10x1.00 thread for the line leading to the rear brake caliper

So how does it work?
Quite simply, the pump on the handlebars can be operated as long as the combined brake pump is not pressed.
The pressure is routed directly through the combination brake pump to the rear brake caliper.

However, when the handlebar pump is pressed, the combined brake pump can also be actuated.
In principle, the two pumps are arranged in series.

If the combined brake pump is pressed, you can press the handlebar pump as much as you want. Nothing happens because the inlet (M12x1.00) is “sealed off” by the piston in the combined brake pump.

HEL-Performance®thumb brake pump TB-1
(Article is discontinued. Successor is the new thumb brake pump MK-II, handlebar mounting)

We are continuing with new products from HEL Performance.
Next up is the new radial thumb brake pump.

• The TB-1 is both tricky and ingenious.
• The many adjustment options should leave nothing to be desired in terms of customization.
• The clamp is aligned in the desired position and attached to the fork.
  (NOTE: The clamp does not have a joint as shown, but is a one-piece clamp.
  The fork or triple clamp must be loosened accordingly for installation).
• The lever distance can be conveniently adjusted at any time as with the radial brake pump (adjustment wheel)
• The lever has a joint that can be used to position the end of the lever higher or lower.
• In addition, the end of the lever is in two parts. This allows you to adjust the length of the lever yourself.

Thumbs, what more could you want !!! ?? !!

It is available in two versions:
a) 13mm piston diameter, nickel-plated housing
b) 13mm piston diameter, black anodized housing

The lever itself is always supplied in black anodized.

The clamp (one-piece, without joint) for attachment to the fork can be selected in the following sizes/diameters,
and at no extra charge when ordering:

40 mm, 41 mm, 42 mm, 43 mm, 44 mm, 45 mm, 46 mm, 47 mm, 48 mm, 49 mm,
50 mm, 51 mm, 52 mm, 53 mm, 53.5 mm, 54 mm, 55 mm, 56 mm, 57 mm, 58 mm

HEL-Performance®stainless steel bleeder nipple, M6x1.00

Finally a stainless steel bleeder nipple!
No corrosion, high strength!


Scope of delivery: 1 x stainless steel bleeder nipple

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)