HEL-Performance Stainless Steel Braided Hose!
Custom-made according to your specifications! Please send us your drawing or sketch. Feel free to use our dimension sheets as well.

NEW: You now have the option to upload a drawing or sketch directly. (PDF, JPG, or PNG, max 3 MB) Simply proceed to checkout from your shopping cart and upload a file. This is optional. Otherwise, please feel free to send us the information via email.

Design: Stainless steel-sheathed PTFE hose assembly, custom-made according to your drawing! Comes with a parts certificate!

Whether you need the hose for a vehicle, a machine, or another application, we’ll manufacture the right hose exactly according to your specifications.

For use on motor vehicles, you will receive a DEKRA parts certificate. An installation inspection may be required.

When placing your order, please specify the desired hose color, the connection type, and any necessary brackets, as well as the key numbers for 2.1 and 2.2, or HSN / TSN from the vehicle registration certificate, and—just to be safe—the vehicle data (make, model, type, year of manufacture) as well.

You can twist the connectors on the finished cable yourself for a twist-free installation—anytime!

You have 14 wire colors to choose from at no extra charge:
Transparent, Carbon Look, Black, White, Red-Transparent, Red, Orange, Yellow, Green, Blue-Transparent, Blue, Transparent-Purple, Pink

For many models, we already offer pre-assembled kits in various routing configurations:

OEM, like the original (Standard Kit): The brake lines match an original replacement part in length, number, and routing.

Alternatively, Full Length: Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.

Alternatively, Over the Mudguard: One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the fender to the left brake caliper.

You can also find steel-braided hoses for other models and configurations on our website www.helperformance.de(please click on the link)

HEL Performance Stainless Steel Braided Brake Line

	Banjo fitting / ring eye H692-03C-xx = straight H693-03C-xx = 20° angled H693-03C-xx-RB = 20° downward / 20° right-angled H693-03C-xx-LB = 20° downward / 20° left-bent H694-03C-xx = 45° angled H697-03C-xx = 70° bent H699-03C-xx = 90° bent H695-03C-xx = 20° bent sideways H699-03C-xx-EXT = 90° side bend, long shank Simply replace -xx with the corresponding size: 10, 11, 12, 08, and 06 mm. Example: H692-03C-10 = 10 mm, straight
	external thread, movable screw with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). Can also be supplied angled, bent up to 90°. Simply let us know the required angle. H652-xxC = straight H673-xxC = 45° bent H674-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H652-31C = M10 x 1.00, straight
	internal thread, floating nut with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, only concave; for 1/8", only convex). M10x1.00 and x1.25 can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 13 H650-xxC = straight H653-xxC = 45° bent H654-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP (H650 only) -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H650-31C = M10 x 1.00, straight
	internal thread, sliding nut, with NUT with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). M10x1.00 and x1.25 can also be supplied in angled versions, bent up to 90°. Simply let us know the required angle. SW 17 H663-xxC = straight H663-xxC-45 = bent at 45° H663-xxC-90 = bent at 90° Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H663-31C = M10 x 1.00, straight H663-31C-VAG = straight, double-stepped
	Internal thread, movable nut, stepped, with groove with double sealing cone: convex (outer cone) / concave (inner cone), Can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 17 H675-31C = straight H675-31C-45 = bent at 45° H675-31C-90 = bent at 90°
	Internal thread, movable nut, double-stepped, with NUT with double sealing cone: convex (outer cone) / concave (inner cone), SW 17 H663-31C-VAG = straight, double-stepped
	External thread, fixed with double sealing cone: convex (outer cone) / concave (inner cone), (for 3/8" UNF, concave only), and sealing surface for copper sealing ring! SW17 H657-xxC = straight H658-xxC = straight, extra long H659-03C = 3/8", straight, long H669-31C = M10x1.00, straight, long H669-32C = M10x1.25, straight, long Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H657-31C = M10x1.00, straight
	internal thread, fixed with sealing cone, SW17 H660-31C = straight, concave H660-31C-SQUARE = straight, concave H670-31C = straight, with groove, convex
	Hose Fittings / Mounts      GROMMET, rubber, black       HLL-001, plastic, black HLL-002, plastic, black       HLL-003, plastic, black HLL-004, plastic, black   HLL-005, plastic, black HLL-006, plastic, black       HLL-007, rubber, black

Brake line kits from HEL Performance come with ABE or a parts certificate!

The required hollow screws and copper gaskets are automatically included in the line kit!
_{(Applies only to line kits HBFxxxx, HBRxxxx, HBCxxxx; not to custom-made individual lines)}

HEL Performance also offers brake line kits with an “alternative routing” configuration, complete with ABE approval!

When ordering, please specify the desired line color, the vehicle type, and the vehicle’s type code. (Code number under sections 2.1 and 2.2 in the vehicle registration certificate)

The ABE is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

Note: The photos shown are examples and do not depict the brake line kit for the specified vehicle! When placing your order, you can specify your desired hose color. The lines will then be custom-made “fresh” for you according to your preferences and specifications!

Technical Specifications:

You can also find notes and instructions in the "Questions and Answers" section _{(click the link)}:  

Steel-braided hose with a permanently crimped T-fitting! HEL Performance!
Custom-made to your specifications, starting at €143.90!

NEW: You can now upload a drawing or sketch directly. (PDF, JPG, or PNG, max. 3 MB) Simply proceed to checkout from your shopping cart and upload a file. You can do this, but it’s not required. Otherwise, feel free to send us the information via email.

Construction: Stainless steel-sheathed PTFE hose assembly, custom-made to your specifications! Comes with a parts certificate!

Whether you need the hose for a vehicle, a machine, or any other application, we’ll manufacture the perfect hose exactly according to your specifications. For use on motor vehicles, you’ll receive a DEKRA parts certificate . An installation inspection may be required.
When placing your order, please specify the desired cable color, the connector type, and any brackets you may need, as well as the key numbers for 2.1 and 2.2, or the HSN / TSN from the vehicle registration certificate, and—just to be safe—the vehicle details (make, model, type, year of manufacture) .

You can have us manufacture the following variants based on the sketches.
Simply fill out the corresponding drawing and send it to us.
You’ll receive a customized quote from us right away.
You can download the dimension sheets here as a PDF file
HEL-Massblätter-GMS2017.pdf

Or you can send us your own sketch.
We can manufacture almost anything that can be connected to other parts.
Feel free to challenge us!

You have 14 wire colors to choose from at no extra charge:

Transparent, Carbon Look, Black, White, Gold Look, Red-Transparent, Red, Orange, Yellow, Green, Blue-Transparent, Blue, Transparent-Purple, Pink

Additional colors are available upon request. Please contact us with your color preference.

You can twist the connectors on the finished cable for a twist-free installation—anytime!

	Banjo connector / ring eye H692-03C-xx = straight H693-03C-xx = 20° bent H693-03C-xx-RB = bent 20° down / 20° to the right H693-03C-xx-LB = 20° downward / 20° left-bent H694-03C-xx = 45° bent H697-03C-xx = 70° angled H699-03C-xx = 90° bent H695-03C-xx = 20° laterally bent H699-03C-xx-EXT = 90° bent to the side, long shank Simply replace -xx with the corresponding size: 10, 11, 12, 08, or 06 mm. Example: H692-03C-10 = 10 mm, straight
	external thread, movable screw with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). Can also be supplied angled, bent up to 90°. Simply specify the required angle. H652-xxC = straight H673-xxC = 45° bend H674-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H652-31C = M10x1.00, straight
	internal thread, floating nut with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, only concave; for 1/8", only convex). M10x1.00 and x1.25 can also be supplied as angled, bent up to 90°. Simply let us know the required angle. SW 13 H650-xxC = straight H653-xxC = bent at 45° H654-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP (H650 only) -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H650-31C = M10 x 1.00, straight
	internal thread, sliding nut, with NUT with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). M10x1.00 and x1.25 can also be supplied in angled versions, bent up to 90°. Simply let us know the required angle. SW 17 H663-xxC = straight H663-xxC-45 = bent at 45° H663-xxC-90 = bent at 90° Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H663-31C = M10 x 1.00, straight H663-31C-VAG = straight, double-stepped
	Internal thread, movable nut, stepped, with groove with double sealing cone: convex (outer cone) / concave (inner cone), Can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 17 H675-31C = straight H675-31C-45 = bent at 45° H675-31C-90 = bent 90°
	Internal thread, movable nut, double-stepped, with NUT with double sealing cone: convex (outer cone) / concave (inner cone), SW 17 H663-31C-VAG = straight, double-stepped
	External thread, fixed with double sealing cone: convex (outer cone) / concave (inner cone), (concave only for 3/8" UNF), and sealing surface for copper sealing ring! SW17 H657-xxC = straight H658-xxC = straight, extra-long H659-03C = 3/8", straight, long H669-31C = M10x1.00, straight, long H669-32C = M10x1.25, straight, long Simply replace -xx with the corresponding thread size -03 = 3/8"x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H657-31C = M10x1.00, straight
	internal thread, fixed with sealing cone, SW17 H660-31C = straight, concave H660-31C-SQUARE = straight, concave H670-31C = straight, with groove, convex
	Hose Fittings / Mounts      GROMMET, rubber, black       HLL-001, plastic, black HLL-002, plastic, black       HLL-003, plastic, black HLL-004, plastic, black   HLL-005, plastic, black HLL-006, plastic, black       HLL-007, rubber, black

Brake line kits from HEL Performance come with ABE or a parts certificate!

The required hollow screws and copper gaskets are automatically included in the line kit!
_{(Applies only to line kits HBFxxxx, HBRxxxx, HBCxxxx; not to custom-made individual lines)}

HEL Performance also offers brake line kits with an “alternative routing” configuration that come with ABE approval!

When ordering, please specify the desired hose color, vehicle type, and the vehicle’s model code. (Code numbers for sections 2.1 and 2.2 in the vehicle registration certificate)

You can choose from 14 line colors at no extra charge:
Transparent, Carbon Look, Black, White, Red-Transparent, Red, Orange, Yellow, Green, Blue-Transparent, Blue, Transparent-Purple, Pink

For many models, we offer various routing options:

OEM, like the original (Standard Kit): The brake lines match an original replacement part in length, number, and routing.

Alternatively, Full Length: Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.

Alternatively, Over the Mudguard: One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the mudguard to the left brake caliper.

You can also find stainless steel braided brake lines for other models and configurations on our website at www.helperformance.de(please click the link)

HEL Performance Stainless Steel Braided Brake Line

The General Operating Permit (ABE) is continuously updated. If your vehicle is not listed, or is not yet included, please contact us directly.

Note: The photos shown are examples and do not depict the brake line kit for the specified vehicle! When placing your order, you can specify your desired hose color. The lines will then be custom-made for you according to your preferences and specifications!

Technical Specifications:

You can also find tips and instructions in the “Questions and Answers” section _{(click the link)}:  

-

HEL-Performance Stainless Steel Braided Hose!
Custom-made to your specifications!

NEW: You now have the option to upload a drawing or sketch directly. Simply proceed to checkout from your shopping cart and upload a file. This is optional. Otherwise, feel free to send us the information via email.

Design: Stainless steel-sheathed PTFE hose, custom-made to your specifications! Comes with a parts certificate!

Whether you need the hose for a vehicle, a machine, or another application, we’ll manufacture the perfect hose exactly to your specifications.

For use on motor vehicles, you will receive a DEKRA parts certificate.
An installation inspection may be required.

When placing your order, please specify the desired cable color, the connector type, and any necessary mounts, as well as the key numbers for 2.1 and 2.2, or the HSN / TSN from the vehicle registration certificate and, to be on the safe side, also the vehicle data (make, model, type, year of manufacture) .

You have 14 cable colors to choose from at no extra charge:

Transparent, Carbon Look, Black, White, Gold Look, Red-Transparent, Red, Orange, Yellow, Green, Blue-Transparent, Blue, Transparent-Purple, Pink

Additional colors are available upon request. Please contact us with your color preference.

You can twist the connectors on the finished cable for a twist-free installation—anytime!

	Banjo connector / ring eye H692-03C-xx = straight H693-03C-xx = 20° angled H693-03C-xx-RB = 20° downward / 20° right-angled H693-03C-xx-LB = 20° downward / 20° left-bent H694-03C-xx = 45° bent H697-03C-xx = 70° bent H699-03C-xx = 90° bent H695-03C-xx = 20° bent sideways H699-03C-xx-EXT = 90° bent sideways, long shank Simply replace -xx with the corresponding size: 10, 11, 12, 08, and 06 mm. Example: H692-03C-10 = 10 mm, straight
	external thread, adjustable screw with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). Can also be supplied angled, bent up to 90°. Simply let us know the required angle. H652-xxC = straight H673-xxC = 45° bent H674-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H652-31C = M10 x 1.00, straight
	internal thread, floating nut with double sealing cone: convex (outer cone) / concave (inner cone) (for 3/8" UNF, only concave; for 1/8", only convex). M10x1.00 and x1.25 can also be supplied in angled versions, bent up to 90°. Simply let us know the required angle. SW 13 H650-xxC = straight H653-xxC = bent at 45° H654-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP (H650 only) -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H650-31C = M10 x 1.00, straight
	internal thread, sliding nut, with NUT with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). M10x1.00 and x1.25 can also be supplied in angled versions, bent up to 90°. Simply let us know the required angle. SW 17 H663-xxC = straight H663-xxC-45 = bent at 45° H663-xxC-90 = bent at 90° Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H663-31C = M10 x 1.00, straight H663-31C-VAG = straight, double-stepped
	Internal thread, movable nut, stepped, with GROOVE with double sealing cone: convex (outer cone) / concave (inner cone), Can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 17 H675-31C = straight H675-31C-45 = bent at 45° H675-31C-90 = bent 90°
	Internal thread, movable nut, double-stepped, with NUT with double sealing cone: convex (outer cone) / concave (inner cone), SW 17 H663-31C-VAG = straight, double-stepped
	External thread, fixed with double sealing cone: convex (outer cone) / concave (inner cone), (for 3/8" UNF, concave only), and sealing surface for copper sealing ring! SW17 H657-xxC = straight H658-xxC = straight, extra long H659-03C = 3/8", straight, long H669-31C = M10x1.00, straight, long H669-32C = M10x1.25, straight, long Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H657-31C = M10x1.00, straight
	internal thread, fixed with sealing cone, SW17 H660-31C = straight, concave H660-31C-SQUARE = straight, concave H670-31C = straight, with groove, convex
	Hose Grips / Holders      GROMMET, rubber, black       HLL-001, plastic, black HLL-002, plastic, black       HLL-003, plastic, black HLL-004, plastic, black   HLL-005, plastic, black HLL-006, plastic, black       HLL-007, rubber, black

You can find Stahllflex wiring kits for many vehicle models and configurations at
and on our website motorrad.helperformance.de(please click on the link)

For many models, we offer various routing options:
OEM, like the original (standard kit):
The brake lines match an original replacement part in length, number, and routing.
Alternatively, Full Length:
Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.
Alternatively, Over the Mudguard:
One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the mudguard to the left brake caliper.

HEL Performance is (to the best of our knowledge) currently the only manufacturer that has an ABE certification for hose kits using this so-called “alternative routing method.” Beware of mislabeledhoses that lack ABE certification. Your safety is at stake!
Tip: Request the corresponding ABEfor the hose kit, including the scope of application!

HEL Performance Stainless Steel Flexible Brake Line

The fine line between victory and defeat

What’s Included:

Note: The photos shown are for illustrative purposes only and do not depict the brake line kit for the specified vehicle! When placing your order, you have the option to specify your desired hose color. The lines will then be custom-made “fresh” for you according to your preferences and specifications!

HEL-Performance® copper sealing rings for 10mm ring connections/screws

Nominal dimensions: 10x15x1.5mm
Sold in packs of 10
(order quantity 10 pieces, 20 pieces etc.)

Tighten brake lines, banjo bolts and connections!
Note Tightening torque for:

• Stainless steel fitting and stainless steel banjo bolts Min. 20 Nm - Max. 33 Nm.
• Stainless steel fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and stainless steel banjo bolt Min. 18 Nm - Max. 21 Nm.
• Aluminum fitting and aluminum banjo bolt Min. 18 Nm - Max. 21 Nm.

The vehicle manufacturer's tightening values must not be exceeded!

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® stainless steel banjo bolt, M10x1.00
Incl. copper sealing rings

Scope of delivery: 1 x stainless steel banjo bolt, 2 x copper sealing ring

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® 2-Piston CNC Brake Caliper, Axial, 84 mm, 2 x 32 mm Pistons

The rear brake caliper from HEL Performance is equipped with 1 pad retaining pin. To replace the brake pads, simply unscrew this pin briefly and replace the pads. The calipers should be blown out with air before reinstallation to ensure that the inner surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the brake caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 480 grams (excluding pads and retaining pin) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process is unable to produce these details. We offer the very highest product quality. The finish is stunning, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 2-stainless-steel-piston (32 mm) caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• 84 mm axial mounting for many modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers.

We currently offer EBC FA266 brake pads in various compound options as an option.

Package Contents:

• 1 x CNC-machined brake caliper
• 1 x stainless steel hollow screw with copper sealing ring

Compatible accessories (not included): EBC Type FA266 brake pads

For more information, please visit the following link

Note: Brake master cylinders and brake calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail under certain conditions.

HEL-Performance®stainless steel breather banjo bolt, M10x1.00
Incl. copper sealing rings and dust cap

Very practical banjo bolt with integrated bleeder nipple.
This allows lines to be bled directly at the banjo bolt.
A very practical tool!

Scope of delivery: 1 x stainless steel bleeder banjo bolt, 2 x copper sealing ring, 1 x dust cap

Steel flex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance® Combined Rear Brake Pump, 13mm Piston Diameter!

The combination brake pump for the rear wheel was developed so that a pump on the handlebars (whether thumb brake or pull brake) can be used in conjunction with the foot brake for the rear wheel. This is often required by the rules. In such cases, the foot brake must remain in place. However, an additional hand-operated brake pump is permitted.

The new combination brake pump has two connections:
            A) M12x1.00 thread for the handlebar-mounted pump (e.g., thumb brake pump)
            B) M10x1.00 thread for the line leading to the rear brake caliper

So how does it work?
Quite simply, the pump on the handlebars can be operated as long as the combined brake pump is not pressed.
The pressure is routed directly through the combination brake pump to the rear brake caliper.

However, when the handlebar pump is pressed, the combined brake pump can also be actuated.
In principle, the two pumps are arranged in series.

If the combined brake pump is pressed, you can press the handlebar pump as much as you want. Nothing happens because the inlet (M12x1.00) is “sealed off” by the piston in the combined brake pump.

HEL-Performance® Handlebar Brake Pump PB-1 (Pullbrake) 10mm Piston Diameter

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new handlebar brake pump.
It’s also sometimes called a “scooter brake” or, in English, a “pullbrake.”

• The PB-1 is already all the rage in some circles
• The pump comes with a handlebar clamp that allows you to adjust the pump’s position to suit your personal needs.
• The clamp is attached directly to the handlebar
• The lever spacing can be easily adjusted at any time, just like with a radial brake pump (adjustment wheel)

Wheelie and slide control made easy!! ?? !!

It is currently available with 10 mm, 11 mm, or 13 mm piston diameters
The housing, lever, and clamp are black anodized

HEL Performance Hose for Expansion Tanks on Brake Pumps, etc. (OEM quality)

Universally compatible with brake pumps, fittings, and expansion tanks.

Inner diameter: approx. 5.8 mm
Outer diameter: approx. 9.8 mm

Material: EPDM, brake fluid-resistant*

(*DOT 3 & 4, DOT 5, DOT 5.1, and many racing brake fluids)

Replacement lever, compatible with the HBP-1 radial brake master cylinder from HEL Performance

Two-piece aluminum lever (folding lever), CNC-machined, black anodized.

Weight: Approx. 98 grams (without replacement bushing)
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement folding lever, 120 mm, compatible with the HMC2 radial brake master cylinder from HEL Performance (right)

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: approx. 47 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized
Position: Brake / right

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement folding lever, 130 mm, compatible with the HMC2 radial brake master cylinder from HEL Performance (right)

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: approx. 51 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized
Position: Brake / right

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement folding lever, 140 mm, compatible with the HMC2 radial brake master cylinder from HEL Performance (right)

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: approx. 52 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized
Position: Brake / right

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement lever, suitable for HEL Performance thumb brake pump MK-II (on handlebars)

2 versions:
a) short (standard)
b) long (on request)

One-piece aluminium lever, CNC-machined, black anodized.

Weight : Approx. 80 grams
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake hose kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Replacement lever, suitable for the thumb brake MK-1 (mounted on the fork) HEL Performance

One-piece aluminium lever, CNC-machined, black anodized.

Weight : Approx. ?? gram (I still have to weigh it :-)
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Replacement lever, compatible with the HBP-1 radial brake master cylinder from HEL Performance

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: Approx. 102 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized

Steel-braided brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feel in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement lever, suitable for the radial brake pump HBP-1 from HEL Performance

One-piece aluminium lever, CNC-machined, black anodized.

This lever has a fixed pivot point, i.e. WITHOUT the insert for changing the lever ratio. (In the picture it is the lower lever)
The lever is also designed so that the Schlater unit on the handlebar/throttle grip has no space underneath it. This means that a throttle grip alone works well, but the lever is unsuitable with the usual Schlater unit.

Weight : Approx. 102 grams
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake hose kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

short replacement lever Form-2, (curved 195mm), suitable for the radial brake pump HBP-1 from HEL Performance

One-piece aluminium lever, CNC-machined, black anodized. Overall length 195mm

The lever is identical to the Standrard lever (curved, 215mm) except for the overall length of 195mm.

Weight : Approx. 78 grams
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake hose kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Remote Adjuster for HEL Performance HMC2 Radial Brake Master Cylinder

• Machined aluminum
• Individually adjustable, swiveling/rotating
• Adjust the brake lever position using the adjustment wheel
• Adjusts the brake bite point while riding
• Clamp fits 20 mm handlebar tubes/stubs
• Cable length approx. 90 cm (can be shortened)
• Height: 48 mm

Weight: Approx. 100 grams
Material: Aluminum, black anodized