HEL-Performance Stainless Steel Braided Hose!
Custom-made according to your specifications!

Design: Stainless steel-sheathed PTFE hose, custom-made to your specifications! Comes with a parts certificate!

Whether you need the hose for a vehicle, a machine, or any other application, we’ll manufacture the perfect hose exactly to your specifications.
If you need a specific angle for the connection, please note it in the text field. We are able to bend or crimp all connections—including those available in bent versions—to almost any desired angle. Otherwise, just ask what’s possible and what isn’t.

For use on motor vehicles, you will receive a DEKRA parts certificate. An installation inspection may be required.

When placing your order, please specify the desired hose color, the connection type, and any brackets you may need, as well as the key numbers for 2.1 and 2.2, or the HSN / TSN from the vehicle registration certificate, and—just to be safe—the vehicle data (make, model, type, year of manufacture) as well.

You can twist the connectors on the finished cable yourself for a twist-free installation—at any time!

You have 14 wire colors to choose from at no extra charge:
Transparent, Carbon Look, Black, White, Red-Transparent, Red, Orange, Yellow, Green, Blue-Transparent, Blue, Transparent-Purple, Pink

For many models, we already offer pre-assembled kits in various routing configurations:

OEM, like the original (Standard Kit): The brake lines match an original replacement part in length, number, and routing.

Alternatively, Full Length: Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.

Alternatively, Over the Mudguard: One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the fender to the left brake caliper.

You can also find stainless steel braided brake lines for other models and configurations on our website at www.helperformance.de(please click the link)

HEL Performance Stainless Steel Braided Brake Line

	Banjo fitting / ring eye H692-03C-xx = straight H693-03C-xx = 20° angled H693-03C-xx-RB = 20° downward / 20° right-angled H693-03C-xx-LB = 20° downward / 20° left-bent H694-03C-xx = 45° bent H697-03C-xx = 70° angled H699-03C-xx = 90° bent H695-03C-xx = 20° bent sideways H699-03C-xx-EXT = 90° side-bent, long shank Simply replace -xx with the corresponding size: 10, 11, 12, 08, and 06 mm. Example: H692-03C-10 = 10 mm, straight
	external thread, movable screw with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). Can also be supplied angled, bent up to 90°. Simply let us know the required angle. H652-xxC = straight H673-xxC = 45° bent H674-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H652-31C = M10 x 1.00, straight
	internal thread, floating nut with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, only concave; for 1/8", only convex). M10x1.00 and x1.25 can also be supplied in angled versions, bent up to 90°. Simply let us know the required angle. SW 13 H650-xxC = straight H653-xxC = bent at 45° H654-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP (H650 only) -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H650-31C = M10 x 1.00, straight
	internal thread, sliding nut, with NUT with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). M10x1.00 and x1.25 can also be supplied in an angled version, bent up to 90°. Simply let us know the required angle. SW 17 H663-xxC = straight H663-xxC-45 = bent at 45° H663-xxC-90 = bent at 90° Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H663-31C = M10 x 1.00, straight H663-31C-VAG = straight, double-stepped
	Internal thread, movable nut, stepped, with GROOVE with double sealing cone: convex (outer cone) / concave (inner cone), Can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 17 H675-31C = straight H675-31C-45 = bent at 45° H675-31C-90 = bent 90°
	Internal thread, adjustable nut, double-stepped, with NUT with double sealing cone: convex (outer cone) / concave (inner cone), SW 17 H663-31C-VAG = straight, double-stepped
	External thread, fixed with double sealing cone: convex (outer cone) / concave (inner cone), (for 3/8" UNF, concave only), and sealing surface for copper sealing ring! SW17 H657-xxC = straight H658-xxC = straight, extra-long H659-03C = 3/8", straight, long H669-31C = M10x1.00, straight, long H669-32C = M10x1.25, straight, long Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H657-31C = M10x1.00, straight
	internal thread, fixed with sealing cone, SW17 H660-31C = straight, concave H660-31C-SQUARE = straight, concave H670-31C = straight, with groove, convex
	Hose Fittings / Brackets      GROMMET, rubber, black       HLL-001, plastic, black HLL-002, plastic, black       HLL-003, plastic, black HLL-004, plastic, black   HLL-005, plastic, black HLL-006, plastic, black       HLL-007, rubber, black

Brake line kits from HEL Performance come with ABE or a parts certificate!

The required hollow screws and copper gaskets are automatically included in the line kit!
_{(Applies only to line kits HBFxxxx, HBRxxxx, HBCxxxx; not to custom-made individual lines)}

HEL Performance also offers brake line kits with an “alternative routing” option—complete with ABE approval!

When ordering, please specify the desired line color, the vehicle type, and the vehicle’s type code. (Code number under sections 2.1 and 2.2 in the vehicle registration certificate)

The General Operating Permit (ABE) is continuously updated. If your vehicle is not listed—or not yet listed—please contact us directly.

Note: The photos shown are examples and do not depict the brake line kit for the specified vehicle! When placing your order, you have the option to specify your desired hose color. The lines will then be custom-made for you according to your preferences and specifications!

Technical Specifications:

You can also find tips and instructions in the "Questions and Answers" section _{(click the link)}:  

HEL-Performance Stainless Steel Flexible Hose for Motocross/Off-Road Vehicles!
Custom-made to your specifications!

Design: Stainless steel-sheathed PTFE hose, with an additional HART-PVC protective tube, universal fit based on your measurements! Comes with a parts certification! The HART-PVC tube is securely attached to the hoseusing thick-walled heat-shrink tubing. The heat-shrink tubing has a hot-melt adhesive on the inside.

Whether you need the line for a vehicle, a machine, or another application, we’ll manufacture the right line exactly according to your specifications.

For use on motor vehicles, you’ll receive a DEKRA parts certificate.
An installation inspection may be required.

When placing your order, please specify the desired cable color, the connector type, and any necessary mounts, as well as the key numbers for 2.1 and 2.2, or the HSN / TSN from the vehicle registration certificate, and—just to be safe—also include the vehicle details (make, model, type, year of manufacture) .

You have 14 wire colors to choose from at no extra charge:

Transparent, Carbon Look, Black, White, Gold Look, Red-Transparent, Red, Orange, Yellow, Green, Blue-Transparent, Blue, Transparent-Purple, Pink

Additional colors are available upon request. Please contact us with your color preference.

You can twist the connectors on the finished cable for tangle-free installation—anytime!

	Banjo connector / ring eye H692-03C-xx = straight H693-03C-xx = 20° angled H693-03C-xx-RB = bent 20° downward / 20° to the right H693-03C-xx-LB = 20° downward / 20° to the left H694-03C-xx = 45° bent H697-03C-xx = 70° angled H699-03C-xx = 90° bent H695-03C-xx = 20° bent sideways H699-03C-xx-EXT = 90° bent sideways, long shank Simply replace -xx with the corresponding size: 10, 11, 12, 08, and 06 mm. Example: H692-03C-10 = 10 mm, straight
	external thread, adjustable screw with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). Can also be supplied angled, bent up to 90°. Simply let us know the required angle. H652-xxC = straight H673-xxC = 45° bent H674-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H652-31C = M10 x 1.00, straight
	internal thread, movable nut with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, only concave; for 1/8", only convex). M10x1.00 and x1.25 can also be supplied angled, bent up to 90°. Simply let us know the required angle. SW 13 H650-xxC = straight H653-xxC = 45° bent H654-xxC = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -18 = 1/8" x 28 BSP (H650 only) -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H650-31C = M10 x 1.00, straight
	internal thread, sliding nut, with NUT with double sealing cone: convex (outer cone) / concave (inner cone); (for 3/8" UNF, concave only). M10x1.00 and x1.25 can also be supplied as angled, bent up to 90°. Simply let us know the required angle. SW 17 H663-xxC = straight H663-xxC-45 = bent at 45° H663-xxC-90 = 90° bent Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H663-31C = M10 x 1.00, straight H663-31C-VAG = straight, double-stepped
	Internal thread, sliding nut, stepped, with groove with double sealing cone: convex (outer cone) / concave (inner cone), Can also be supplied bent at angles up to 90°. Simply let us know the required angle. SW 17 H675-31C = straight H675-31C-45 = bent at 45° H675-31C-90 = bent at 90°
	Internal thread, movable nut, double-stepped, with NUT with double sealing cone: convex (outer cone) / concave (inner cone), SW 17 H663-31C-VAG = straight, double-stepped
	External thread, fixed with double sealing cone: convex (outer cone) / concave (inner cone), (for 3/8" UNF, concave only), and sealing surface for copper sealing ring! SW17 H657-xxC = straight H658-xxC = straight, extra-long H659-03C = 3/8", straight, long H669-31C = M10x1.00, straight, long H669-32C = M10x1.25, straight, long Simply replace -xx with the corresponding thread size -03 = 3/8" x 24 UNF -31 = M10 x 1.00 -32 = M10 x 1.25 Example: H657-31C = M10x1.00, straight
	internal thread, fixed with sealing cone, SW17 H660-31C = straight, concave H660-31C-SQUARE = straight, concave H670-31C = straight, with groove, convex
	Hose Fittings / Holders      GROMMET, rubber, black       HLL-001, plastic, black HLL-002, plastic, black       HLL-003, plastic, black HLL-004, plastic, black   HLL-005, plastic, black HLL-006, plastic, black       HLL-007, rubber, black

You can find Stahllflex wiring kits for many vehicle models and configurations at
and on our website motorrad.helperformance.de(please click the link)

For many models, we offer various routing options:
OEM, like the original (standard kit):
The brake lines correspond to an original replacement part in terms of length, number, and routing.
Alternatively, Full Length:
Two lines routed directly from the brake master cylinder—one to the right and one to the left—to the brake calipers.
Alternatively, Over the Mudguard:
One line runs directly from the brake master cylinder to the right brake caliper; the second runs from there over the mudguard to the left brake caliper.

HEL Performance is (to the best of our knowledge) currently the only manufacturer that holds an ABE certification for hose kits using this so-called “alternative routing method.” Protect yourself from mislabeledhoses that lack ABE certification. Your safety is at stake!
Tip: Request the corresponding ABE certificate with the scope of applicationwhen purchasing the line set!

HEL Performance Stainless Steel Flexible Brake Line

The fine line between victory and defeat

What’s Included:

Note: The photos shown are for illustrative purposes only and do not depict the brake line kit for the specified vehicle! When placing your order, you have the option to specify your desired hose color. The lines will then be custom-made “fresh” for you according to your preferences and specifications!

HEL-Performance® 2-Piston CNC Brake Caliper, Axial, 84 mm, 2 x 32 mm Pistons

The rear brake caliper from HEL Performance is equipped with 1 pad retaining pin. To replace the brake pads, simply unscrew this pin briefly and replace the pads. The calipers should be blown out with air before reinstallation to ensure that the inner surfaces are clean. Separate bleed nipples ensure that the bleed point is located at the highest possible point on the brake caliper. Our brake calipers also feature a complete, circumferential fluid path. This means that fluid flows in a complete loop through the brake caliper, making it easier to completely remove air from the system.

Our brake calipers weigh 480 grams (excluding pads and retaining pin) and are equipped with stainless steel pistons. Stainless steel acts as a heat sink, dissipating the heat generated by braking. The brake fluid heats up less. The boiling point of brake fluids varies depending on the specific fluid used. Storing the heat in the pistons instead of heating the fluid improves braking performance over a longer period—perfect for the track.

We manufacture our brake calipers exclusively on state-of-the-art CNC machines from solid 6082-T6 billet aluminum. Many mass-produced brake calipers are forged, but this limits their design possibilities. The forged parts must also be machined for threads and the internal flow path, as the forging process is unable to produce these details. We offer the very highest product quality. The finish is stunning, with every part machined to CNC precision. We maximize weight savings and minimize material consumption. Radial mounting of two-piece brake pads with two pads per caliper.

• 2-stainless-steel-piston (32 mm) caliper design.
• The caliper is made of solid 6082-T6 aluminum.
• High-temperature seals.
• 84 mm axial mounting for many modern motorcycles.
• The kit includes an instruction manual with all the information regarding installation, bleeding, maintenance, and more.

The calipers are designed to accommodate stock brake pads for well-known supersport motorcycles. This gives you a wide selection of brake pads from nearly all manufacturers and suppliers.

We currently offer EBC FA266 brake pads in various compound options as an option.

Package Contents:

• 1 x CNC-machined brake caliper
• 1 x stainless steel hollow screw with copper sealing ring

Compatible accessories (not included): EBC Type FA266 brake pads

For more information, please visit the following link

Note: Brake master cylinders and brake calipers from HEL Performance are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seals to fail under certain conditions.

HEL-Performance® Radial Hand Brake Master Cylinder, 19 or 16 mm Piston Diameter! HMC-MK-I

!!! 2025 Price Reduction: Now Only €289.00 MSRP !!!

The HEL Performance radial brake master cylinder has now become a staple of the racing scene.
Machined from solid material (housing and lever) and a real steal for less than 300 euros!

It is available in two versions:
a) 19 mm piston diameter ( 19 x 18, 19 x 19, 19 x 20 mm)
b) 16 mm piston diameter ( 16 x 18, 16 x 19, 16 x 20mm)

Both the housing and the lever are milled from solid material at HEL Performance in Exeter (UK) using brand-new CNC machining centers. The housing is nickel-plated, and the lever is black anodized.

The newly developed brake levers come with two inserts that allow the pump’s gear ratio to be adjusted as needed.

Insert 1) has a center hole, while Insert 2) has an off-center hole.

Simply swap or rotate the insert to set the desired gear ratio for optimal control and brake feel.

The pumps are designed for use onboth the right and left sides of the handlebars !!! The bleed nipples and the brake line connection have the same thread (M10x1.00). This allows either the brake line or, optionally, the bleed nipple to be used at both holes.

Weight: Approx. 285 grams
Material : Housing / Lever = 6082-T6 aluminum, machined from solid
                            Pistons and screws = stainless steel
Housing: hard-coated or anodized
Lever: Anodized

Package Contents:
1 x radial brake cylinder with brake lever
2 x inserts for adjusting the lever ratio
1 x M10x1.00 stainless steel hollow screw with copper O-rings
Installation/Maintenance Instructions

An ABE is in the works!!

#WhatsStoppingYou

Note: HEL Performance brake master cylinders and calipers are not compatible with Castrol’s SRF Racing brake fluid! Using this brake fluid may cause seal failure under certain conditions.

HEL-Performance® Rear Brake Master Cylinder, 13mm Piston Diameter!

We’re continuing to move forward with new products from HEL Performance.
Next, we’re introducing the new brake master cylinder for the rear wheel.

It is available in two variants and versions:
a) 13mm piston diameter, black anodized housing
b) 13mm piston diameter, nickel-plated housing

c) 13mm piston diameter, black anodized housing, 2 x M10x1.00 connections for use with, e.g., a thumb brake
d) 13 mm piston diameter, nickel-plated housing, 2 x M10x1.00 connections for use with, for example, a thumb brake

HEL-Performance®stainless steel bleeder nipple, M10x1.00x15 (length below hexagon to end of tip)

Finally a stainless steel bleeder nipple!
No corrosion, high strength!


Scope of delivery: 1 x stainless steel bleeder nipple

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

HEL-Performance®dust cap for bleeder nipple
Material: Rubber

The important little cap that you often have to look for.

Very practical with a small tab that is placed over the bleeder nipple.
This means the cap can no longer get lost.
With HEL step on the cap :-)

Scope of delivery: 1 x dust cap, rubber

Braided steel brake lines and kits from HEL Performance :)

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Replacement lever, compatible with the HBP-1 radial brake master cylinder from HEL Performance

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: Approx. 102 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized

Steel-braided brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feel in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

HEL Performance Hose for Expansion Tanks on Brake Pumps, etc. (OEM quality)

Universally compatible with brake pumps, fittings, and expansion tanks.

Inner diameter: approx. 5.8 mm
Outer diameter: approx. 9.8 mm

Material: EPDM, brake fluid-resistant*

(*DOT 3 & 4, DOT 5, DOT 5.1, and many racing brake fluids)

HEL Performance mounting bracket 75mm made of stainless steel. E.g. AG container or similar

Small, practical item made of stainless steel. Laser cut. Universal use.
The holder is very easy to bend and shape by hand, e.g. to optimally position the expansion tank.

Dimensions: approx. 75 x 2mm (measured in the middle of the hole)

Material: Stainless steel

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• No expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Replacement lever, suitable for the finger brake pump HPB-1 from HEL Performance

One-piece aluminium lever, CNC-machined, black anodized.

Weight : Approx. 80 grams
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake hose kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Replacement folding lever, 120 mm, compatible with the HMC2 radial brake master cylinder from HEL Performance (right)

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: approx. 47 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized
Position: Brake / right

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement folding lever, 130 mm, compatible with the HMC2 radial brake master cylinder from HEL Performance (right)

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: approx. 51 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized
Position: Brake / right

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® Brake Line Kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement folding lever, 140 mm, compatible with the HMC2 radial brake master cylinder from HEL Performance (right)

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: approx. 52 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized
Position: Brake / right

Stahlflex brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feeling in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement lever, suitable for HEL Performance thumb brake pump MK-II (on handlebars)

2 versions:
a) short (standard)
b) long (on request)

One-piece aluminium lever, CNC-machined, black anodized.

Weight : Approx. 80 grams
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake hose kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Replacement lever, suitable for the thumb brake MK-1 (mounted on the fork) HEL Performance

One-piece aluminium lever, CNC-machined, black anodized.

Weight : Approx. ?? gram (I still have to weigh it :-)
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Replacement lever, compatible with the HBP-1 radial brake master cylinder from HEL Performance

One-piece aluminum lever, CNC-machined, black anodized. 

Weight: Approx. 102 grams
Material: 6082-T6 aluminum, machined from solid
Lever: Anodized

Steel-braided brake lines and kits from HEL Performance:

HEL-Performance® brake line kit, including hollow screws** and accessories**

• No line expansion at high temperatures
• Eliminates the spongy feel in the brake lever
• Direct and precise braking response
• Teflon inner liner with stainless steel jacket
• Exclusively stainless steel fittings
• Lower maintenance costs for the braking system
• Technology proven in motorsports

* For information on availability and delivery with ABE or component certification, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.helperformance.com/certification

The ABE is continuously updated. If your vehicle is not listed, or not yet listed, please contact us directly.

(** is included, if required)

Replacement lever, suitable for the radial brake pump HBP-1 from HEL Performance

One-piece aluminium lever, CNC-machined, black anodized.

This lever has a fixed pivot point, i.e. WITHOUT the insert for changing the lever ratio. (In the picture it is the lower lever)
The lever is also designed so that the Schlater unit on the handlebar/throttle grip has no space underneath it. This means that a throttle grip alone works well, but the lever is unsuitable with the usual Schlater unit.

Weight : Approx. 102 grams
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake hose kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

short replacement lever Form-2, (curved 195mm), suitable for the radial brake pump HBP-1 from HEL Performance

One-piece aluminium lever, CNC-machined, black anodized. Overall length 195mm

The lever is identical to the Standrard lever (curved, 215mm) except for the overall length of 195mm.

Weight : Approx. 78 grams
Material : 6082-T6 aluminum, milled from the solid
Lever : Anodized

Braided steel brake lines and kits from HEL Performance:

HEL-Performance® brake hose kit, including banjo bolts** and accessories**

• no expansion of the lines at high temperatures
• eliminates the spongy feeling on the brake lever
• direct and precise braking point
• Teflon inner core with stainless steel sheathing
• only stainless steel connections
• Lower maintenance costs for the brake system
• Motorsport proven technology

* For availability and delivery with ABE or parts certificate, please refer to the latest version of our ABE, which you can download here as a PDF file:

www.help erformance.com/certification

The ABE is updated on an ongoing basis. If your vehicle is not or not yet included, please contact us directly.

(** is included, if required)

Remote Adjuster for HEL Performance HMC2 Radial Brake Master Cylinder

• Machined aluminum
• Individually adjustable, swiveling/rotating
• Adjust the brake lever position using the adjustment wheel
• Adjusts the brake bite point while riding
• Clamp fits 20 mm handlebar tubes/stubs
• Cable length approx. 90 cm (can be shortened)
• Height: 48 mm

Weight: Approx. 100 grams
Material: Aluminum, black anodized